Specifications:
The document outlines the specifications for lateral valves, specifically the 5-PCD-1 10 and 5-PCD-2 10 models. These are 2/2 way valves that are externally controlled with a pressure range of PN 0-200 bar and an orifice of DN 10 mm. The valves are available in normally closed (NC) and normally open (NO) configurations. The design is pressure balanced with a spring return, and body materials include aluminium and stainless steel. Seal materials vary from PU, NBR to PTFE, PE, FPM, and EPDM.

Procedures:
Details required for main valve operation include orifice, port, function (NC/NO), operating pressure, flow rate, media type, media temperature, ambient temperature, and type of actuation. For pneumatic actuation, nominal voltage, type of protection, and actuation pressure range are necessary. Hydraulic actuation requires actuation pressure range and hydraulic control valve function.

Norms and Standards:
The valves adhere to protection standards IP 65 (P54) according to DIN 40 050. Electrical connections follow DIN EN 175301-803 form B standards.

Recommendations:
It is recommended to ensure complete and precise order or application specifications to avoid incorrect technical design. The document also suggests that application-specific layouts related to temperature, pressure conditions, switching behavior, and media consistency may require modifications to materials and seal arrangements.

Key Data from Tables and Diagrams:
The pressure range for pneumatic actuation is 4-10 bar, with air consumption of 7 cm³/stroke for PCD-1 and 17 cm³/stroke for PCD-2. The hydraulic actuation pressure range is 10-30 bar, with options for higher pressures upon request. The valves have a switching cycle of 700 per minute and a switching time of 30-3000 ms for both opening and closing.

Additional Information:
Valves are equipped with mounting holes on the valve body and have options for manual override via a 5/2-way pilot valve. The document also mentions the availability of illuminated plugs with varistors and optional M12x1 connectors.