slide valves brochure
12Pages

Slide Valves Slide Valves Slide Valves

Overview The Mucon name has been synonymous with the flow control of bulk solids, since launching the first ever Iris Diaphragm Valve in 1946. However, in applications where flow control is not a key requirement, a more robust total shut-off solution can be more appropriate. Identifying this need, we have developed a range of innovative, yet cost effective, Slide Gate Valves; Harnessing almost seventy years experience in the design and manufacture of valves and other bulk solids handling equipment allows Mucon to continually meet the requirements of an ever demanding market. SD-P In-line...

SD-P In-line Pneumatic Operation Valve Key Benefits Uninterrupted smooth bore when the valve is fully open C C Effective fully sealed closure Self cleaning slide gate blade Dust tight operation Extremely low maintenance Smooth, efficient operation Slim design 2 x LIFTING POINTS 2 x LIFTINGFACE ON EACH POINTS ON EACH FACE Main Features • • • • • • Powered by a low friction, high efficiency pneumatic cylinder Provision for 'earth' tags where there is potential for static electricity generation Lifting points provided at the valve’s centre of gravity Flange dimensions to DIN or ANSI patterns...

SD-H In-line Hand Wheel Operation Valve Key Benefits • • • • • • • Main Features • • • • • • Valve Type Operated by a multi-start drive screw via a large radius hand wheel Provision for 'earth' tags, where there is potential for static electricity generation Lifting points provided at the valve’s centre of gravity Flange dimensions to DIN or ANSI patterns Rated up to +1barg conveying pressures ATEX certified to 1D/2D categories Valve Nominal Bore J H K 2 x LIFTING POINTS 18 ON EACH180 FACE 4 240 4 22 Nett Weight 2 x EARTHING CONNECTION POINTS ON EACH FACE G - HOLES ØH THRU ON A ØJ PCD...

SD-P In-line Pneumatic Operation Valve SEAL LOADING MAT (SILICONE) SEAL PLATES (PET POLYMER) SIDE RAIL (ALUMINIUM ALLOY) BLADE (STAINLESS STEEL - 316L) Open and Closed Switches C HAND WHEEL (CARBON STEEL P ) COVERS (ALUMINIUM ALLOY) OPERATION SUPPORT (ALUMINIUM ALLOY) Q Nett M N P In L most cases, an automated controlWeight system will require a feedback28 signal, identifying 6 whether the valve is open or 27.0 kg 51 M16x2 228 closed. To facilitate this requirement the cylinder of the 36.3 kg 51 M20x2.5 28 285 8 SD-P valve can be fitted with open and closed indication 46.0 kg 51 10 M20x2.5...

UNOBSTRUCTED FULL BORE OPENING RGV Roller Gate Valve Key Benefits • Uninterrupted opening due to our patented blade support system • Heavy duty construction for arduous applications • Self compensating blade scraper seal keeps the product contained and also 9 WIDE x 16 LONG cleans the blade during operation 'F' (TOTAL) FLANGE SLOTS • All valve seals and guides can be replaced in-situ (TYPICAL BOTH FACES) • Easily adapted for round outlets or ducts • Steel rollers as standard • Fast and smooth blade action A 1:3 Main Features • • • • Available in a variety of materials and finishes Able to...

RGV Roller Gate Valve Solenoid and switch assemblies available - See page 5 for further information SEAL LOADING MAT SEAL LOADING MAT (SILICONE) SEAL LOADING MAT (SILICONE) (SILICONE) SEAL PLATES (PET POLYMER) SEAL PLATE SEAL PLATES (PET POLYM (PET POLYME Replaceable Blade Guides and Seals Our design allows for different materials of construction for contact and non-contact surfaces C 126 Replaceable Blade Stop A 126 Uninterrupted Product Flow D SECTION THROUGH FRONT SIDE FRAME SHOWING BLADE SUPPORTS Replaceable rear Blade Guides C Self compensating blade scraper seal is provided in a...

Key Benefits • Externally replaceable slide gate supports BLADE B • Unlike other manual slide valves the DSV does not use an eccentric cam to BLADE 1 : 3 OPERATION SUPPORT (STAINLESS STEEL - 316L) COVERS support the slide gate OPERATION SUPPORT OPERATION SUPPORT COVERS (ALUMINIUM ALLOY) (STAINLESS STEEL - 316L) COVERS (ALUMINIUM ALLOY) (ALUMINIUM ALLOY) (ALUMINIUM ALLOY) • Slim, compact design (ALUMINIUM ALLOY) (ALUMINIUM ALLOY) 12 11 9 8 • Pneumatic cylinder can be added retrospectively10 • Ideally suited for the gravity discharging of materials in an in-line application H • Robust...

DSV-P Valve 4 step conversion procedure from hand operated to pneumatic actuation - without the need to remove the valve from its application. 6 Fit the clevis to the existing handle - note the holes are already there 3 Simply loosen some of the existing fasteners and slide the pneumatic support housing into place G Pneumatic Support Housing Attach the cylinder on its support plate N Cylinder Support Plate PNEUMATIC CYLINDER Connect the cylinder to the clevis and fix the guard plate Guard Plate PNEUMATIC CYLINDER

DSV-P Valve Key Benefits • Externally replaceable slide gate supports • Unlike other manual slide valves, the DSV does not use an eccentric cam to support the slide gate • Slim, compact design • Compact and lightweight • Full bore opening • Pneumatic actuator, specifically designed to facilitate addition retrospectively Main Features • • • • • Ideal for the isolation of powders, granules and pellets Position switches and solenoid assemblies are available Optional adapters to fit PN10 and ANSI flanges Can be converted to hand operation in just minutes Optional open and closed position...

SV Open Discharge Valve THIS DRAWING IS TH PROCESS COMPONENT MUST NOT BE COPIED A THIRD PARTY WITH A CONSENT OF THIS CO Main Features and Benefits • Greater forces can be applied to the stainless steel stiffened handle compared to conventional plastic handles • Slide plate runners are designed to withstand heavy loading • Fully interchangeable with the equivalent size Mucon Series H Iris Valve • All stainless steel slide plate, handle and fixings provide greater protection from corrosion • Robust aluminium body Lock Off Facility – Locks the valve in the closed position utilising Lockout...