disc valves brochure
12Pages

Disc Valves Disc Valves Disc Valves

Introduction Process Components Ltd is the only manufacturer and supplier of the Mucon product range within the liquid, powder and bulk solids handling sectors. Iris Valves - The Original Mucon Valve Slide Gate Valves Butterfly Valves Disc Valves (Swing Gate Valves) Discharge Aids Level Indicators Industry Sectors • • • • • • Food Processing Pharmaceutical Chemical Processing Glass and Ceramics Plastics Sand and Cement Mucon equipment has been used extensively in the bulk materials handling industries for over 60 years, during which time the company has built up an excellent reputation for...

Mucon Disc Valves The Origin The Mucon brand has long been synonymous the world over for its well established range of Iris Diaphragm Valves. The Iris Valve in particular has long been recognised as the best valve for controlling the flow of bulk powders and solids. Over the years the Iris Valve has seen continued product development, resulting in a variety of models to suit a large array of customer applications. However, despite the unique versatility of the Mucon Iris Diaphragm Valve, it is not suitable for every single application - particularly those involving high temperature,...

Mucon Disc Valve Features Main Features • Valve outlet is larger than the inlet ensuring full bore, uninterrupted flow of product, without transitional hang up • Seating face is protected from direct abrasion • Angled seating face ensures no jamming, as guide ways are not used for the slide plate to run on • The disc is free floating on a radially moving arm. The disc as a result takes up the same angle as the seating face, thus creating a slight wedging action and dust tight seal, as well as compensating wear on the disc • Disc is totally retracted from the area of product flow • Standard...

Mucon Disc Valve Applications Mucon Disc Valves (Swing Gate Valves) relish the most arduous of applications - be they abrasive products or high frequency operation. In such situations, they demonstrate their worth in terms of reliability, longevity and low maintenance. Not only will they consistently control the flow of product, they will ensure it stays within the system and does not leak to atmosphere. Besides their proven worth as a general purpose, dry bulk solids shut-off valve, Disc Valves have demonstrated that they are the ideal valve for charging dry materials into reactor vessels....

Hand and Pneumatic Disc Valve Specifications Inlet Bore Sizes: Easy Standard Maintenance Cast corrosion resistant LM25 Aluminium Alloy Cast Iron grade SG200 Stainless Steel grade 316 (not available for 300mm valves) Body Finish: Standard • Cast Molybdenum filled Nylon • Cast Iron grade 12 for high • temperature applications PTFE is used where temperature and corrosive considerations both apply Seat Seal: Body Materials: Standard • Nitrile Rubber ‘O’ ring • Silicone, Viton or PTFE encapsulated • Viton Rubber ‘O’ ring Shaft Seals: Standard Aluminium and Stainless Steel have a bead blast...

Hand and Pneumatic Disc Valve Specifications Hand Valve Operation: Hand Lever Operating Lever and Stop Plate: • Standard - Stainless Steel • Easy Clean - Cast Aluminium/Plastic Weights: Size • Standard - Plugged air purge point connection into Disc recess area Pneumatic Valve Operation: Pneumatic cylinder mounted on a stainless steel plate and covered by a glass reinforced plastic cover Supply and Consumption: Air Supply 5.5 barg (80 psig) Clean lubricated or non-lubricated compressed air * The figures are provided for continuous operation of the valve. Electric Supply: 110v or 240v, 1ph,...

Unless otherwise stated, all dimensions in mm Standard Hand Operated

Unless otherwise stated, all dimensions in mm / Weights given in kgs Valve Type Valve Type Standard Pneumatically Operated

Unless otherwise stated, all dimensions in mm Valve Type Easy Maintenance Hand Operated

Unless otherwise stated, all dimensions in mm / Weights given in kgs Valve Type Valve Type Easy Maintenance Pneumatically Operated

Process Components Ltd Graphic House Bank Street Macclesfield Cheshire SK11 7AR United Kingdom T: +44 (0) 1625 412000 F: +44 (0) 1625 412001 sales@mucon.com www.mucon.com Mucon is a registered trademark of Process Components Ltd Reference: STADCVGENEN1B © Process Components Ltd