DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY
8Pages

{{requestButtons}}

Catalog excerpts

DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 1

Smallest suction excavator for inner-city civil engineering

Open the catalog to page 1
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 2

Big performance for a small power pack More efficient cable and line installation. No ifs, no buts. Specialist in small construction sites No street too narrow, no construction site too critical: The MTS DINOCITY was specially developed for such requirements, which civil engineering companies must confront in inner-city areas today. Traditional 3 or 4-axle models are too large or too heavy for construction sites on footpaths, complex road layouts, narrow alleys and pedestrian zones. Not least because there is already a significant density of sensitive supply infrastructure such as water and...

Open the catalog to page 2
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 3

Revolution in the smallest of spaces The DINOCITY combines functionality and design Compact. Manoeuvrable. High suction. Unique in performance and innovation. With its unbeatable manoeuvrability and powerful suction performance, our latest DINOCITY can operate optimally in confined spaces: Extraction of the materials produced is done safely, easily and without the risk of damaging lines or cables, as happens time and again when traditional diggers are used. The number of cities in which diggers can no longer be used at all is increasing as a result. In comparison with conventional digging...

Open the catalog to page 3
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 4

The innovative system for a decisive advantage Equipment and technical parameters: eight: 3.3 m; Length 7.0 m (Volvo FL); H Short wheelbase: 3.8 m Container: 3,5 m3 Empty weight: 13.8 t (VOLVO FL hydrostat) Installation of the compressed air hose reels on the left and/or right More than 4 t legal vehicle load capacity (e.g. >2.6 m3 of sand) Centre-mounted, stable force arm (EVOARM) for working to the left and right of the vehicle Large size suction hose diameter d = 20 cm for sucking up coarser earth materials Remote control for easy operation of the power arm and the emptying functions...

Open the catalog to page 4
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 5

On the road with a big boom arm New standard for improved stability Significantly increased action radius & reach: therefore also suitable for working under bridges and in trenches as well as vertically upward orce arm mounted on a centre console with the option of working to the left and right of the F vehicle at the edge of the road uction pipe remains coupled to the force arm and does not have to be mounted and removed S for transportation Stable force arm for working with two extension pipes IKE suction pipe system MTS Mobile Tiefbau Saugsysteme GmbH | 5

Open the catalog to page 5
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 6

Efficient & environmentally friendly Optimised airflow for economical working Environmentally friendly. Naturally. The latest city suction excavator has also been optimised when it comes to environmental performance and can impress during operation with significantly lower fuel consumption and reduced noise pollution, which are increasingly important criteria for inner-city use. Innovative airflow principle Best suction capacity in its class Optimised airflow with maximum physical separating function Lowest filter load owing to even air distribution and innovative dedusting system Dedusting...

Open the catalog to page 6
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 7

Material disposal made easy Well thought-out solutions for every construction site Intelligent handling of the suction material Deposit and removal of materials present major logistical challenges on many construction sites. Emptying of the extracted material into big bags ensures a clean construction site and easier removal at a later point in time using a grabber vehicle or crane tipper. In addition to traditional tipping onto the ground, the material can also be conveniently tipped into depressions and low skip containers and driven off at a later point in time. Well thought-out for...

Open the catalog to page 7
DINOCITY: Smallest suction excavator from MTS for inner-city civil engineering - The DINOCITY - 8

Our DINO fleet for maximum suction efficiency DINOCITY The City Racer For Urban Professionals Universal & Flexible Universal Workhorse Triple Suction Force MTS Mobile Tiefbau Saugsysteme GmbH Experts in suction technology MTS Mobile Tiefbau Saugsysteme GmbH Siegfried-Jantzer-Straße 5-7 D-76726 Germersheim Tel: +49 (0) 7274 500 60-0 Fax: +49 (0) 7274 500 60 18 E-Mail: info@saugbagger.com www.SAUGBAGGER.com MTS Mobile Tiefbau Saugsysteme GmbH, with its headquarters in Germersheim, has specialised in the development and production of innovative suction excavators and mobile suction systems for...

Open the catalog to page 8

All MTS Mobile Tiefbau Saugsysteme GmbH catalogs and technical brochures