MTL solutions for Yokogawa Centum VP & ProSafe-RS systems Intrinsically safe solutions you can profit from

With a comprehensive range of Integrated IS, Network Security, Wireless, HMI displays, Foundation™ fieldbus and Surge protection solutions, MTL are committed to providing Yokogawa and its customers the best in quality, introduction MTL has a long history of providing solutions to Yokogawa for intrinsic safety applications from the early Centum XL and ProSafe to the latest Centum VP and ProSafeRS systems. MTL is a renowned and respected supplier for intrinsic safety with over 40 years experience in the industry. The interface solutions provided meet all the requirements for worldwide applications. MTL's...

Yokogawa Centum VP and ProSafe RS integrated solutions MTL4500 series IS interfaces Both the Centum and ProSafe solutions are based on the same format 8 and 16 way backplanes designs. MTL backplanes may be surface or dual DIN rail mounted. All MTL4500 series analogue input and output modules are HART compatible. HART is passed directly through to HART compatible system cards. Alternatively the backplanes may be used to extract the HART data into a separate maintenance system via the MTL4800 series HART multiplexer products. For digital signals, isolators may be chosen to provide line monitoring...

A range of dedicated backplanes and connections units are available to interface with MTL4500 series intrinsically safe isolator modules and the MTL HART maintenance system products. Note: Compatible module alternatives MTL4516 specified, MTL4513 is compatible MTL4524 specified, MTL4525 is compatible. *NOTE: in Off state max output voltage is 4V open circuit. MTL4541 specified, MTL4532 in pulse to current mode, MTL4541A or MTL4575 are compatible.

ProSafe RSMTL4500 series interfaces A dedicated range of backplane interfaces are available to interface the ProSafe RS safety system with MTL4500 series intrinsically safe isolator modules and the MTL HART maintenance system. The MTL4600 series isolator range provides channel to channel signal isolation when used with Centum VP or ProSafeRS in non-intrinsically safe applications. 1500Vac isolation is provided, this protects the system cards from high common mode voltages, that can occur under fault conditions. The MTL4600 modules are used with the appropriate CPY backplanes described earlier. MTL...

YTB series - These termination boards provide remote terminations via standard cable connections to the Centum VP and ProSafe RS systems. All interfaces are supplied in carriers for DIN rail mounting. Dual power supplies and power monitoring are provided, where required. Double row field terminals to provide maximum packing density. Product number YTA series - These termination boards provide remote terminations via standard cable connections to the Centum VP and ProSafe RS systems. All interfaces are supplied in carriers for DIN rail mounting. Dual power supplies and power monitoring are provided,...

Centum VP & Stardom Foundation™ fieldbus91xx & F10x Series conditioned Fieldbus power supplies Type • Redundant fieldbus power for Foundation™ fieldbus cards • Flexible N+1 redundancy • Can reduce initial capital cost by 25% whilst supporting future expansion • Fully isolated hot-swappable power modules • Low power dissipation • On-line diagnostics option • Pluggable trunk surge protection option

EATON Crouse-Hinds series The safety you rely on. See the complete MTL product portfolio at www.mtl-inst.com U.S. (Global Headquarters): Eaton's Crouse-Hinds Business 1201 Wolf Street Syracuse, NY 13208 (866) 764-5454 FAX: (315) 477-5179 FAX Orders Only: (866) 653-0640 [email protected] For more information: If further assistance is required, please contact an authorised MTL Distributor, Sales Office, or Customer Service Department JAPAN Cooper Crouse-Hinds Japan KK, MT Building 3F, 2-7-5 Shiba Daimon, Minato-ku, Tokyo, Japan 105-0012 Tel: +81 (0)3 6430 3128 Fax: +81 (0)3 6430 3129 E-mail:...