Specifications:
The MT1180M50VH is an 11/80 GHz 2 ft parabolic antenna with a gain of 34/51 dBi. It complies with RoHS, CE, ETSI EN 302 217-4 V2.1.1 (2017-05), and FCC 47 CFR 101.115 regulations. The frequency ranges are 10.0 – 11.7 GHz and 71.0 – 76.0 & 81.0-86.0 GHz. Gain varies across bands, with a maximum of 51.0 dBi in the high band. VSWR is 2.0:1 for the low band and 1.5:1 for the high band. The antenna supports single or dual polarization (V+H) with a 3 dB azimuth beam width of 3.1º for the low band and 0.4º for the high band. Side lobe suppression meets FCC Category B standards, and cross polarization meets ETSI Class 3 and FCC standards. The front-to-back ratio is 55 dB for the low band and 67 dB for the high band, with an XPD of 30 dB.

Mechanical Specifications:
The antenna has a diameter of 655 mm and a depth of 300 mm, weighing a maximum of 8 kg. It features a circular or rectangular waveguide interface and a plastic radome. The mounting kit (MT-120032/A) weighs up to 4 kg.

Environmental Specifications:
The antenna is tested under various conditions: low temperature (-55°C for 72 hours), high temperature (+71°C for 72 hours), temperature cycling (-45°C to +70°C for 3 cycles), vibration (IEC 60721-3-4), mechanical shock (IEC 60721-3-4), humidity (95% for 144 hours), water tightness (IP67), solar radiation (1000 hours), salt spray (500 hours), and ice and snow (25mm radial). It can survive wind speeds up to 252 km/h and operate at speeds up to 164 km/h.