Catalogs >
MTI Instruments >
NEW Accumeasure D series - Digital Capacitance Measurement Sensors

NEW Accumeasure D series - Digital Capacitance Measurement Sensors
1 / 4Pages

Catalog excerpts

NEW Accumeasure D series - Digital Capacitance Measurement Sensors - 1

A worldwide leader in precision measurement solutions Standard and Custom Capacitance Probes Available True Direct Digital Capacitive Displacement Sensor Up to 0.01% FSR Linearity Sub-nanometer Resolution NEWDAQU.cdr03.27.2015Rev1.0

Open the catalog to page 1

NEW Accumeasure D series - Digital Capacitance Measurement Sensors - 2

Core Features Highest resolution in the industry with 0.01% linearity Digitally Controlled (user adjustable): Range Extension. One probe - multiple ranges Selectable Frequency Filter. 0.1Hz to 5kHz Sample Rate. Up to 20kHz 24 bit ADC bit count MTI Basic Software included TM NI LabVIEW Driver Included .NET (VB, C+, C++) compatible, DLL drivers available Thickness Mode 2 and 4 channel amplifier configuration. A pair of probes needed for thickness. Multiple Unit Synchronization - synchronizes several units together for multiple point measurement, such as sheet metal thickness, semiconductor...

Open the catalog to page 2

NEW Accumeasure D series - Digital Capacitance Measurement Sensors - 3

USB flashdrive with MTI basic software Users manual Drivers Detachable terminal blocks USB cable Ethernet cable (2m) Type A to Micro-B Cat 6 network cable The Accumeasure D series amplifier is a true revolutionary design that uses the latest technology to convert a highly reliable capacitive electric field measurement (displacement) directly into a highly precise 24 bit digital reading. Guard Ring Our new capacitance amplifier converts the probe capacitance directly to target gap (distance). This direct conversion approach eliminates errors that traditional analog amplifiers have due to...

Open the catalog to page 3

NEW Accumeasure D series - Digital Capacitance Measurement Sensors - 4

Tip for Accurate Ordering Process Probe Configuration 0=single-ended probe(s) *1= Push/Pull configuration *2=180o configuration Amplifier Main Product Code * applicable to 2 or 4 channels only # of channels Choose from 1 to 4 channels amplifier Output Type 0=standard digital output 1= add analog output Range Extension ADC Bit Count Exponential Filter Basic Interface Digital Output Analog Output Span 0 to 12.5mm1 0.0006% FSR at 50Hz 3 0.000085% FSR (at a fixed point, 1 Hz bandwith) 2 0.100 nm2 o 20ppm /month or better at (±1 C) ±0.01% FSR2 5kHz 100 min. to 20,000 max. (samples per second)...

Open the catalog to page 4