A worldwide leader in precision measurement solutions ACCUMEASURE Capacitance Probes TM Standard and Custom Capacitance Probes Available

An SMA connector is built in to the probe. The cable is connected to CONNECTOR TYPE RADIAL the capacitive sensor with a connector and it exits the probe radially. SMA CONNECTOR INTEGRAL LEAD RADIAL RADIAL PROBE MOUNTING SIDE VIEW The cable is low-noise highly flexible silicone integral to the ILR probe and exits the probe radially. BOTTOM VIEW CONNECTOR TYPE AXIAL The cable is connected to the CTA capacitive sensor with a connector and it exits the probe axially. INTEGRAL LEAD AXIAL AXIAL PROBE MOUNTING SIDE VIEW The cable is low-noise highly flexible silicone integral to the ILA probe and exits...

PRODUCT CODE PRODUCT CODE PRODUCT CODE PRODUCT CODE PRODUCT CODE

PRODUCT CODE PRODUCT CODE PANCAKE SQUARE RADIAL PROBES PRODUCT CODE PRODUCT NUMBER Range Min. Range Resolution at 10Hz RMS Max Range Extension1 Resolution at 5kHz RMS E L W T Hole Information nm µi mm Inch mm Inch mm Inch mm Inch

Probe Recommended Stand-off Ranges Probe Specifications Cable and Probe Temperature Rating: Connector Temperature Rating: 1 Accuracy : Probe and Cable Interchangeability: Pressure Rating Standard: Material: -130°C (-202°F) to 200°C (392°F). Cryogenic and higher temperature probes are available up to 1200°C - consult MTI Factory. A BNC to SMA adapter is required -65°C (-85°F) to 85°C(185°F) ±0.01% FSR or better, of range when probe and amplifier are calibrated to a known standard at x1 range extension. Accurate to within ± 0.2% at X1 range extension without recalibration 1400kPa (200 psig) Stainless...