A worldwide leader in precision measurement solutions Portable signal source for calibrating electronic equipment and machinery monitoring systems. 1510A PRECISION SIGNAL SIMULATOR ▪ Voltage Signals ▪ Charge Signals ▪ Machinery Speed Signals ▪ Dual outputs ▪ Direct Digital Synthesis ▪ Wide Frequency range ▪ 40 Built-in memories ▪ Sweep Generator ▪ Battery powered

Achieve the highest accuracy with the most advanced calibrator ever offered Inspired by the popular 1500CS, the New 1510A Precision Signal Simulator from MTI Instruments combines high precision voltage and charge mode signal generation in a single portable device with new features. Use the 1510A in the laboratory, in test cells, on the flight line, in the calibration shop, on the factory floor or any place that precision signals are required for equipment maintenance or calibration. Initially designed for machinery and gas turbine maintenance, the 1510A produces accurate and precise voltage,...

Special functions for machinery and instrumentation systems Testing and calibrating machinery monitoring and control systems is difficult when vibration, speed and other signals must be simulated simultaneously. The 1510A has two output channels to simplify your testing and calibration processes, and they may be synchronized or run independent of each other. Special tachometer and signal phase functions enable versatile test strategies to check balancing systems, gas turbine engine monitoring systems, and other machinery support equipment. SPEED SIGNAL GENERATION is a snap with the 1510A. Machinery...

Designed to improve productivity The 1510A is a tool that improves productivity as well as ensuring equipment and system accuracy. From the high visibility protective boot and the internal signal setting memory to the easy to use keyboard interface, the 1510A has features to make the job easier. MEMORY for PRODUCTIVITY – All signal settings can be saved and retrieved from the 1510A’s 40 location memory to reduce programming and test time, and to ensure test repeatability. PORTABLE - The 1510A can be used anyplace. It is small, lightweight, portable, and operates from internal NiMH batteries or...

Standard signal types (for speed synthesizer signals, see next page) Waveform: Sine Wave Voltage Range (0.1 Hz to 100 kHz) Voltage Accuracy (of setting, 10mV -10V) (10Hz-20Hz) (20Hz-30kHz) (30kHz – 50kHz) (50kHz – 80kHz) (80kHz – 100kHz) Charge Range (10 Hz to 100 kHz) Charge Accuracy (of setting) (10pC –10,000pC, 10Hz-30kHz) Resolution (voltage & charge) Level Types Frequency Range Distortion (10 Hz to 50 kHz) (50 kHz to 100 kHz) Frequency Accuracy (of setting) (3 Hz to 100 kHz) Variable phase (all waveform types) Chan A phase on any waveform type can be synchronized and locked to Chan B phase,...

Other Features Speed Synthesizer Signals Controls and features User Display Ratio Speed Signal Function Signal Type Signal Range Resolution Frequency Range (ratio) Units Sine, Square, Single pulse, Odd Pulse 0 to 9.9999 Volts Pk 0.1 mV 0.1 to 100X Chan A frequency, Step 0.1 RMS, peak, or pk-pk Battery Charger Port Single Pulse Signal Function Signal Type Signal Range Resolution Pulse Duty Cycle Frequency Range (ratio) Frequency Range (fixed) Units Computer Port Graphical, 128x64 pixel, B&W transflective LCD white backlight USB 1.0 for remote control, programming, and calibration USB-A Connector...