Catalogs >
MTA S.p.A >
PureTec

PureTec
6Pages

Catalog excerpts

PureTec Compressed air filtration Purifying your compressed air, increasing your efficiency.

PureTec Modern industrial processes are reaching ever higher levels of sophistication, and their Compressed Air networks require ever higher air purity levels; the consequences of inadequate or low efficiency filtration are increased downtime, high maintenance costs and reduced product quality. MTA’s PureTec filters avoid these undesired consequences, offering guaranteed and lab tested filtration efficiency levels within an extensive range which satisfies all individual User needs. A complete range for all your filtration needs PureTec HEF (threaded aluminium) PureTec B (flanged carbon...

Open the catalog to page 2

Why quality filtration? Modern industrial applications require ever higher quality air. Applications such as pneumatic automation, electronics, pharmaceutical and food industries, to name just a few, are becoming ever more sophisticated and require ever greater levels of air purity. The level of atmospheric contamination that can be found in air typically amounts to as much as 140 million particles per cubic metre. About 80% of these are smaller than 2 microns in size, and therefore pass through the air compressor’s air intake filter and pass into the compressed air network itself. When...

Open the catalog to page 3

Element Filtration Grades Filtration grade type maximum particle size CLEANFIT element installation: CLEANFIT (standard on HEF005-070) greatly simplifies element substitution. Simply place the element in the bowl and screw the bowl onto the head; the element will position itself into its guide in the head, with an O-ring ensuring a tight fit. The advantages are multiple: temperature limit (*) The grade A filters must always be (**) ISO 8573.1 No dirty hands – Used elements are covered in oil; with CLEANFIT there is no need to touch the element itself during substitution. Quick substitution...

Open the catalog to page 4

activted carbon general purpose preceded by a grade S filter. dry particle removal, dust filtration, adsorption dryer post-filter, low pressure dust filtration pre-filtration for refrigeration dryers, general purpose filtration, vacuum pump pre-filtration, air blowers, bulk removal of liquids & solids, pneumatic tools Filter element critical applications Max Air operating connections pressure (bar) (1) Nominal air flows for HEF, B filters refer to FAD conditions, 20 °C, 1 bar(A), and 7 barg operating pressure. For differing operating pressures apply the correction factors from the below...

Open the catalog to page 5

The images of the products in the document are for illustrative purposes only and therefore do not have any contractual value. M.T.A. S.p.A. Business office Viale Spagna, 8 ZI 35020 Tribano (PD) Italy Tel. +39 049 9588611 Fax +39 049 9588676 info@mta-it.com www.mta-it.com MTA Deutschland GmbH Tel: +49 (2157) 12402 - 0 www.mta.de Novair-MTA, S.A.U. (España) Tel: +34 938 281 790 www.novair-mta.com MTA is represented in over 80 countries worldwide. For information concerning your nearest MTA representative please contact M.T.A. S.p.A. The continuous improvement of MTA's products can cause some...

Open the catalog to page 6

PureTec 6Pages

Catalog excerpts

All MTA S.p.A catalogs and technical brochures

PureTec
6Pages