ETM DM

ETM DM

ETM DM

Product catalog summary
Overview
The ETM DM units are modular systems designed for purifying compressed air and improving efficiency. They can be configured in a MASTER/SLAVE setup, featuring a high-efficiency aluminum heat exchanger, separation system, and condensate drain. MASTER modules include an electronic control unit for optimal operation.
Standard Features
  • 2-in-1 heat exchanger optimized for countercurrent exchange.
  • Demister condensate separator effective at low flow rates.
  • IC208CX microprocessor for energy savings and control.
  • Dynamic dew-point DDF function with ambient temperature tracking.
  • General alarm free contact and remote ON/OFF control.
  • Adjustable timed condensate drain and freeze protection.
Options and Kits
  • Condensate separator in AISI304 and zero loss capacitive drain.
  • Various packaging options for shipment.
  • Kits for flanged and hydraulic connections, and propylene glycol management.
  • Supervision and ambient temperature sensor kits.
Installation and Reliability
The compact design allows easy integration into existing systems, ensuring redundancy and reduced downtime during maintenance.
Energy Efficiency
The system adapts energy consumption to actual air requirements, ensuring high energy savings. The TAE tank stores energy in partial load conditions, acting as a thermal mass energy-saving dryer.
Advanced Control and Design
  • Microprocessor control with remote chiller activation.
  • Management of temperatures and condensate drain programming.
  • Digital display readouts for various parameters and alarms.
Technical Data
Detailed specifications for single and multiple module configurations, including nominal air flow, pressure drops, power supply, and connection details.
Energy Saving Calculations
Examples demonstrate significant reductions in energy consumption, costs, and CO² emissions when using ETM DM modules with TAEevo chillers compared to traditional hot gas dryers.
Specifications
Details on module connections, weights, and condensate drain connections.
Procedures
Assembly of modules and air manifolds is the customer's responsibility. For non-standard conditions, use selection software or contact MTA.
Standards and Certifications
MTA products comply with European safety directives (CE symbol) and are ISO9001 certified.
Recommendations
Enhance your system with MTA aftercoolers, separators, filters, adsorption dryers, drains, oil-water separators, and chillers.
Additional Information
MTA is represented in over 80 countries. Contact information for MTA offices in various countries is provided. Product images are illustrative and not contractual.
Disclaimer
The data provided is not binding, and MTA reserves the right to make changes without prior notice.
See more

Catalog excerpts

ETM DM-1

Compressed air treatment modules Nominal air flow 30 – 540 m³/min. Purifying your compressed air, increasing your efficiency.

 Open the catalog to page 1
ETM DM-2

The ETM DM are compressed air treatment modular units that can be connected to each other via MASTER/SLAVE logic. Each unit integrates a high-efficiency compact aluminium exchanger, a separation system and a condensate drain. In the MASTER configuration, the ETM DM modules include an electronic control unit that ensures correct operation. Standard features • An extremely robust 2-in-1 heat exchanger, comprising an air-air • Condensate separator completely in AISI304; heat exchanger, an air-glycol water exchanger – optimised for an • Zero loss capacitive condensate drain; • Packaging for shipment...

 Open the catalog to page 2
ETM DM-3

ETM DM the MTA’s modular air treatment modules for large capacity systems Installable anywhere The upgrading of large systems for the production of compressed air is often problematic and very expensive due to the lack of available space in equipment rooms. ETM DM modules perfectly solve this problem because, thanks to their compact dimensions and the possibility of being connected to a chiller located outside of the compressor room, they can also be easily integrated within existing systems. Multiple SLAVE modules can be connected to a single MASTER module thanks to the inlet/outlet manifolds...

 Open the catalog to page 3
ETM DM-4

Built to perform ADVANCED DIGITAL CONTROL ETM DM module features technologically advanced, easy-to-use microprocessor control. IC208CX manages fully independently operation of the ETM DM module and can activate the chiller using a remote ON/OFF key. CONTROL (MASTER UNIT) Microprocessor control IC208CX. ADVANCED ALUMINUM MODULE An extremely robust 2-in-1 heat exchanger, comprising an air-air heat exchanger, an air-glycol water exchanger – optimised for an exchange in countercurrent. DEMISTER CONDENSATE SEPARATOR Main features • ON/OFF button to turn on the chiller remotely; • Management of the...

 Open the catalog to page 4
ETM DM-5

HIGH EFFICIENCY ALUMINUM HEAT EXCHANGER ETM DM modules feature a 2-in-1 extremely robust aluminum heat exchanger including an Air to Air heat exchanger, the Air to chilled mass heat exchanger with a water separator externally connected by Victaulic joints. This advanced heat exchanger has been engineered specifically to maximize the heat transfer coefficient. Thanks to wide air channels and an oversized demister separator it ensures optimum dewpoint performance and guarantees industry leading pressure drops. Air-to-Air Heat Exchanger Hot and moist air enters the Air-to-Air heat exchanger where...

 Open the catalog to page 5
ETM DM-6

High energy saving COMPARISON OF ENERGY SAVING SYSTEMS ETM DM systems + TAEevo chiller Hot gas dryers (HGBV) In the hot gas dryers (non cycling) the refrigerating compressor operates constantly regardless of the input conditions, using a by-pass valve to control the evaporation pressure. Energy consumption remains almost constant even without compressed air flow. POWER CONSUMPTION % Thanks to the thermal mass technology the systems consisting of the ETM DM modules + TAEevo chiller are able to adapt the refrigeration power produced according to the flow of processed air, ensuring maximum energy...

 Open the catalog to page 6
ETM DM-7

Technical data Single module Power supply Available versions Pressure drops air-side Pressure drops air-side Power supply IN/OUT Water side (2) Condensate MASTER (M) SLAVE (S) drain(3) Connections IN/OUT Air side single module (1) DN125 (5") IN/OUT Manifold Air side (1) IN/OUT Condensate Water side (2) drain(3) MASTER SLAVE V/Ph/Hz (M) (S) ETM DM 060 1 1 230 /1/ 50-60 Overall Dimensions Refer to TWIN 090 + TRIO 090 (*) The data refer to the following operating conditions: air FAD 20 °C/1 bar A, pressure 7 bar (g), ambient temperature 25 °C, air inlet temperature 35 °C, according to the ISO 8573.1...

 Open the catalog to page 7
ETM DM-8

The images of the products in the document are for illustrative purposes only and therefore do not have any contractual value. M.T.A. S.p.A. Viale Spagna, 8 ZI 35020 Tribano (PD) Italy MTA Deutschland GmbH Tel: +49 (2157) 12402 - 0 www.mta.de [email protected] www.mta-it.com Novair-MTA, S.A.U. (España) Tel: +34 938 281 790 www.novair-mta.com SC MTA ROMÂNIA Srl Tel: +40 723 022023 www.mta-it.ro MTA is represented in over 80 countries worldwide. For information concerning your nearest MTA representative please contact M.T.A. S.p.A. The data contained herein is not binding. With a view to continuous...

 Open the catalog to page 8

All MTA S.p.A catalogs and technical brochures

  1. DE X - Flyer

    2  Pages

  2. ARIES G

    2  Pages

  3. OCEAN TECH ME

    2  Pages

  4. AQUARIUS G ME

    2  Pages

  5. CYGNUS TECH

    2  Pages

  6. EnerDyer

    4  Pages

  7. PureTec

    6  Pages

  8. LiquiPure

    2  Pages

  9. LiquiPro

    2  Pages

  10. HPDry

    4  Pages

  11. DE iTECH

    8  Pages

  12. CoolPro

    6  Pages

  13. DE ETM

    8  Pages

  14. HOCEAN TECH

    2  Pages

  15. HTAURUS TECH

    2  Pages

  16. HCYGNUS TECH

    2  Pages

  17. iHCYGNUS TECH

    2  Pages

  18. HARIES TECH

    2  Pages

  19. HAEevo TECH

    2  Pages

  20. TWEevo TECH

    2  Pages

  21. AQUARIUS G

    2  Pages

  22. NEPTUNE TECH

    2  Pages

  23. TAURUS G

    2  Pages

  24. TAURUS TECH

    2  Pages

  25. PHOENIX G

    2  Pages

  26. iPHOENIX G

    2  Pages

  27. ARIEST TECH 2

    2  Pages

  28. TAEevo LWT

    2  Pages

  29. TAEevo TECH

    2  Pages

  30. TAE N Mini

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.