MFplus 16911

Product catalog summary

Overview: The MFplus 16911 is a multifunctional digital manometer designed for volumetric flow rate measurement in industrial stacks. It complies with European Standard EN 16911-1, ISO 10780, and USEPA 40CFR part 60, method 2.

Key Features:

Measures single and differential pressure, atmospheric and absolute pressure, and single and differential temperature.
Optional external transducers for hot wire and vane anemometer, thermo-hygrometer.
Compatible with all market-available Pitot tubes.

Measurement Capabilities:

Humidity: Measures relative humidity, dew point, temperature, and barometric pressure.
Pressure: Utilizes internal or external sensors.
Temperature: Uses thermocouples with two standard K-type sockets.
Flow Speed: Measured using a vane probe or Pitot tube.

Technical Specifications:

Operating Conditions: -10 to +50 °C; RH up to 95% non-condensing.
Display: 3.5" TFT, color, backlit.
Power Supply: Li-Ion battery, 30 hours operation; USB wall-plug charger.
Protection Class: IP43.
Dimensions: 90 x 205 x 38 mm; Weight: approx. 470 g.

Measurement Ranges and Accuracy:

Differential Pressure: ± 100 hPa, Resolution: 0.01 Pa, Accuracy: ± 0.5 ... 10 Pa, ± 2 Pa or ± 1% of reading.
Flow Velocity: 0 ... 100 m/s, Resolution: 0.1 m/s, Accuracy varies with speed.
Absolute Pressure: 700 ... 1,200 hPa, Resolution: 1 Pa, Accuracy: ± 1% of reading.
Gas Temperature: -20 ... +1,200 °C, Resolution: 0.1 °C, Accuracy: ± 1 °C or 1% of reading.
Ambient Air Temperature: -20 ... +80 °C, Resolution: 0.1 °C, Accuracy: ± 1 °C.

Software Features:

Intuitive menu for speed and flow measurement according to EN 16911-1.
Automatic calculation of measuring points and nozzle diameter for isokinetic sampling.
Manual configuration of duct details and measurement parameters.
Automatic density calculation based on gas composition.
Direct measurement of absolute pressure with static pressure difference calculation.
Measurement correction based on Pitot tube factor and wall effect compensation.
Data transfer in CSV format and datalogger with graph for prolonged measurements.

Contact Information: MRU – Messgeraete fuer Rauchgase und Umweltschutz GmbH, Fuchshalde 8 + 12, 74172 Neckarsulm-Obereisesheim, Phone: +49 7132 99620, Email: [email protected], Website: www.mru.eu

Catalog excerpts

MFplus 16911 Multifunctional digital manometer. Compliant to European Standard EN 16911-1, ISO 10780

Open the catalog to page 1

MFplus 16911 Slim, handheld and multifunctional Our MFplus is designed for travers points volumetric flow rate measurement in industrial stacks. These are your special advantages: n Single pressure/differential pressure n Atmospheric/absolute pressure n Single temperature/differential temperature n Optional external transducers input: hot wire and vane anemometer, thermo-hygrometer

Open the catalog to page 2

The device in detail An overview of the special features = Pitot tube positions Equal concentric areas Centers of area of the equal concentric areas Pitot tubes Measurement sketch Compatible for all pitot tubes available on the market In every measurement point it is necessary to determine the average value of flow, according to EN 15259 Pressure measurement Temperature measurement Using either internal or external sensors Using thermocouples with 2 standard K-type sockets Flow speed measurement Humidity measurement Using vane probe or Pitot tube Relative humidity, dew point, temperature and...

Open the catalog to page 3

MFplus 16911 Technical data Measuring range Differential pressure Flow velocity (calculated) Absolute pressure Gas temperature (K-type thermocouple) Ambient air temperature (K-type thermocouple) -20 ... + 80 °C General technical data Operating conditions Internal power supply Li-Ion battery, 30 hours mains free operation Mains power supply USB wall-plug battery charger, 100 ... 240 Vac, 5 V DC, 1 A Protection class Software features n Simple and intuitive menu for speed and flow measurement according to EN 16911-1 n Automatic calculation of the position of the measuring points according to EN...

Open the catalog to page 4

All MRU – Messgeräte für Rauchgase und Umweltschutz catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list