TRIGET Gigabit Ethernet Controller PC/104-Plus Modules - 2 Pages

Add to MyDirectIndustry favorites
TRIGET Gigabit Ethernet Controller PC/104-Plus Modules

Catalog excerpts

Gigabit Ethernet Controller PC/104-Plus Modules General Description The TRIGET-Family consists of highly integrated, flexible and robust PC/104-Plus compliant Ethernet modules for industrial use. With a single PC/104-Plus module a system can be expanded with up to three Gigabit Ethernet controllers! Through the use of a PCI to PCI bridge the TRIGET requires only one slot on a PC/104-Plus stack. Therefore the stack still can be expanded by up to three other PC/104-Plus cards. To match the different system requirements various interfaces and mechanical versions are offered. Chose between RJ45 or 2mm lockable headers as well as two mechanical sizes. The TRIGET works on 5V and 3.3V PCI host boards. Further it supports up to 66MHz PCI operation. TRIGET Highlights ■ ■ ■ ■ ■ ■ ■ ■ Up to three Gigabit Ethernet controllers Only one PC/104-Plus Slot is used Status LEDs onboard Ethernet over RJ45 or 2mm lockable headers 33MHz/66MHz PCI operation Single 5V power supply 5V tolerant 3.3V PCI signaling Long-term* available solution TRIGET-3H with lockable headers These features make the TRIGET ideally suited for network applications that require many independent high-speed interfaces. Through the robust and flexible design the products can be well used in any embedded system. MPL products are 100% designed and manufactured in Switzerland for applications where reliability is key. All products are fanless, shock and vibration proof, low power, rugged, and long-term* available. * Typically 10 years or more, 20+ years repair-ability (after first introduction) Rugget i7 computer with CAN and built-in TRIGET-3M MPL AG is an ISO9001 cert

 Open the catalog to page 1

Technical Features Network Controller Status LEDs Host Interface Intel 82541 PI, up to three controllers onboard 2 LEDs for each port - Link/Activity and Speed PC/104-Plus compliant stackthrough module, up to 66MHz PCI specification revision 2.3 compliant, supports both 5.0V and 3.3V signaling Management Support Automatic polarity detection Automatic MDI/MDI-X detection Jumbo frame support up to 16KB IEEE 802.1 qVLAN support RJ45 or 10-pin 2mm lockable header, supports auto crossover (Auto MDI/MDIX) Physical / Power Power consumption input over PCI connector with 3x Gigabit links Storage...

 Open the catalog to page 2

All MPL catalogs and technical brochures

Archived catalogs