PENDANT CONTROL PANEL
26Pages

PENDANT CONTROL PANEL JOINTS AND SUPPORT SYSTEMS CONSOLE www.mpgamma.com

MPGAMMA STEEL FACTOR QUALITY TECHNOLOGY EXPERIENCE MPGAMMA, with a well-established industrial tradition, is one of the most important manufacturers of stainless steel casings at a national and European level. Knowledge and ongoing learning, factors that are felt and experienced throughout the day, to ensure and enhance our commitment, to look beyond borders. Our continuous research and constant focus on new production technologies are reflected in the manufacturing of each individual product. The perfect interplay between investments, technology and experience creates a quality...

INDEX PRODUCTS PENDANT CONTROL PANEL ENCLOSURES KC SERIES PENDANT CONTROL PANEL ENCLOSURES KCS “SKIN” SERIES SUPPORTING SUSPENSION ARMS T SERIES CONSOLE ARCO T AND ARCO TS SERIES PLUMP CONSOLE PLP SERIES 14-15 16 TRANSPARENT OVERDOOR FOR PENDANT CONTROL PANELS AND CONSOLES LOCKS AND KEYS CONDUCTIVE SEALS DIAGRAM POCKET SWIVEL WHEELS KIT FOR CONSOLE LIFTING FEET KIT FOR CONSOLE BOTTOM TILTED SUPPORT FOR CONSOLE PROTECTION CAPS KIT FOR CONSOLE VENTILATION/FILTERING SYSTEMS OPEN DOOR LOCKING DEVICE FOR CONSOLE WIRING PLATE JOINT FIXING BRACKET FIXED JOINT MACHINE SIDE ROTATING JOINT PENDANT...

PENDANT CONTROL PANEL ENCLOSURES KC SERIES The Pendant control panel enclosures of the “KC” series are designed to contain command and control devices near the operator. FEATURES • Entirely made of AISI 304L steel (Wnr 1.4307). • To be used in conjunction with the “T” series system of load-bearing arms with the relative GM series rotating joints (machine side) or gS series (Pendant control panel side) and fixed joints GF series to ensure smooth control of the instruments. • Designed for support with arms featuring a 48 mm and 60 mm diameter. • Can be assembled with the arm support on the...

VERSION WITH 1 CLOSING POINT DRILLING DETAILS VERSION WITH 2 CLOSING POINTS AVAILABLE SPACE INSIDE THE PENDANT CONTROL PANEL WITH AND WITHOUT THE WIRING PLATE

PENDANT CONTROL PANEL ENCLOSURES KCS “SKIN” SERIES The Pendant control panel enclosures of the KCS “SKIN” series feature an elegant and ultra-thin (just 100 mm) design and have been created to contain command and control devices near the operator. FEATURES • Entirely made of AISI 304L steel (Wnr 1.4307). • At the back there is an inspectable and removable support acting as a link between the supporting arm and the pendant control panel enclosures. • To be used in conjunction with the “T” series system of load-bearing arms with the relative GM series rotating joints (machine side) or...

SUPPORTING SUSPENSION ARMS T SERIES Supporting systems consisting of arms and fixed or rotating joints. To be used in conjunction with our KC and KCS series Pendant control panels items or any other enclosure with an adequate weight and size. • Supporting arms system, item “T” with a diameter measuring 48 mm and 60 mm, fitted with fixed or rotating joints. • Entirely made of AISI 304L (WNR 1.4307) with an external satin finish and smooth or sloping surfaces without interstices. • Designed with a 330° rotation locking system to prevent damage to wiring cables. • The KC403015, KC453515,...

AVAILABLE ACCESSORIES OPERATOR SIDE For orders or quotes, we recommend creating the code by using the designated diagram. Check the recommended minimum and maximum size, by specifying which is the machine side and the Pendant control panel side, as the type of joint is different. (See page 20 and 21 for the type of joint) T PIPE GEOMETRICAL SHAPE PIPE GEOMETRICAL SHAPE PIPE GEOMETRICAL SHAPE PIPE GEOMETRICAL SHAPE A SIDE LENGTH - MIN. 200 x Ø48 - MIN. 250 x Ø60 L SIDE LENGTH - MIN. 400 MACHINE SIDE 1 JOINT TYPE - ROTATING, LARGE MACHINE SIDE 1 JOINT TYPE - FIXED, BEVELLED WITHOUT JOINT ON...

CONSOLE ARCO T AND ARCO TS SERIES The ARCO series was created to meet the need to protect industrial PCs and operator panels, the brain and the interface of all industrial automation systems. Its enclosure, with an attractive design, is entirely made of AISI 304 (WNR 1.4307), one of the best-performing materials in terms of mechanical characteristics and corrosion resistance. The ARCO T solution only consists of the upper storage box, while the TS version also includes the lower box with dropleaf opening. The 2 boxes are connected to each other to allow the cables to pass through. FEATURES...

PLUMP CONSOLE PLP SERIES The PLUMP Console was created to meet the need to protect industrial PCs and operator panels, the brain and the interface of all industrial monitoring and automation systems. PLUMP is an innovative multipurpose system, whose enclosureis suitable for any kind of application. An innovative design, the fact of being easy to clean, the high protection rating and especially the elegance complete the features of the PLUMP system, making it a valuable ally for installers, builders and design engineers in the field of machines and systems for food production and...

ACCESSORIESTRANSPARENT OVERDOOR KC KCS AT° tS° PLP Made of AISI 304 L (WNR 1.4307) stainless steel and used to protect the components and devices mounted at the front of the enclosure, ensuring an IP66 IK10 and IP69K IK10 protection rating. The transparent panel is made of shock-proof LEXAN as standard, but can be replaced with laminated safety glass. Reversible door opening, i.e. the hinges can be mounted on the right or on the left: in the KC , KCS and PLP series it is 180°, while in the ARCO T and ARCO TS series, it is 90° or 180°, depending on the application. A 1/4-turn lock installed,...

VERSION FOR PLUMP CONSOLE PLP The overdoor is assembled in the factory and must be ordered together with the Console. We can supply a kit to be assembled on site, by ordering the SVPLP_K code individually, consisting of a Console door and overdoor. Easy assembly, carried out directly by the final client. AVAILABLE DRILLING SPACE ON THE CONSOLE WITH OVERDOOR VERSION FOR ARCO CONSOLE We supply an assembly kit with the relative template for drilling on side or it can be pre-assembled upon request.