BOXES JUNCTION BOXES www.mpgamma.com PUSH-BUTTON PANELS

STEEL FACTOR MPGAMMA, with a well-established industrial tradition, is one of the most important manufacturers of stainless steel casings at a national and European level. Knowledge and ongoing learning, factors that are felt and experienced throughout the day, to ensure and enhance our commitment, to look beyond borders. Our continuous research and constant focus on new production technologies are reflected in the manufacturing of each individual product. The perfect interplay between investments, technology and experience creates a quality product. Quality certifications are essential to provide...

SOLID DOOR BOX CPN SERIE The solid door box, “CPN” series, are small and mediumsized enclosures, entirely made of stainless steel. They have been created with solidity and modularity features. They are used in different sectors and offer the maximum protection to the installed components. OPTIONALS UPON REQUEST • Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel. • Drilling as per design on body and door. • Body with welded and finished corners. • Resistant silicone seals, from - 50° C to + 180° C. • Door opening a minimum 120° with stainless steel inner hinges, locks with stainless...

AVAILABLE ACCESSORIES VERSION WITH 1 CLOSING POINT VERSION WITH 2 CLOSING POINTS No. 02 hinged doors version

TRANSPARENT DOOR BOX CLN SERIE The transparent door box, “CPN” series, are small and medium-sized enclosures, entirely made of stainless steel. They have been created with solidity and modularity features. They are used in different sectors and offer the maximum protection to the installed components. FEATURES • Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel. • Body with welded and finished corners. • Door opening a minimum 120° with transparent panel in shockproof Lexan. • External door with stainless steel inner hinges, locks with stainless steel double wing insert, welded...

VERSION WITH 1 CLOSING POINT 1. MODELS FRONT VIEW* VERSION WITH 2 CLOSING POINTS 1. Models front view ***

JUNCTION BOXES SDN SERIE The junction boxes entirely made of stainless steel. They have been created to meet request for practicality, installation and cleaning, for compliance with standards for hygiene. FEATURES • Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel. • Body with welded and finished corners. • Cover with welded and finished corners and screwed to the box body. • Polyurethane seal with robotised application. • M4 S/S leak-proof cover-body's clamping screws. • Internal M5x15 stainless steel earthing threaded studs bolts on the cover. • Internal M5 threated spacers on...

PUSH-BUTTON PANELS SPN SERIE The push-button panels of the “SPN” series entirely made of stainless steel. They have been created to meet our demands/request for practicality, installation and cleaning, for compliance with standards for hygiene. OPTIONALS UPON REQUEST • Watertight boxes made in AISI 304L (Wnr 1.4307) stainless steel. • Drilling as per design on body and cover • Body with welded and finished corners. • Resistant silicone seals, from - 50° C to + 180° C. • Cover with welded and finished corners and screwed to the box body. • Products made with AISI 316L or other special steels....

AVAILABLE ACCESSORIES

ACCESSORIes WALL MOUNTING KIT IP66 cpn cLn SDN SPN All standard boxes of CPN and CLN series and SDN and SPN series have drillings on the rear panel for wall mounting, this to facilitate the installation. Thanks to an innovative system, the aesthetics and the protection degree remain unchanged. WALL MOUNTING KIT FOR BOXES cpn cLn For boxes wall mounting it is necessary to use the CACPN013 art. consisting of 4 flat brackets and stainless steel screws. The 4 holes on the rear side of the box are M6 threaded, blind and wit thickness 8 mm. The CACPN013 kit is suitable for all sizes of boxes. 40 15x10...

WALL MOUNTING KIT FOR BOXES For boxes and wall push-button wall mounting it is necessary to use the CASDN013 item consisting of two flat brackets and stainless steel screws. The CASDN013 kit is suitable for all sizes of SDN and SPN, except for SDN303415 and SDN304015 modelsfor which No. 4 wall mounting brackets are needed, so you need to order n° 2 pieces of the CASDN013 art. WIRING PLATE (OPTIONAL) Galvanized sheet metal wiring plate. For features and dimensions see drawings on pages. 8-10 in the sections dedicated to SDN series boxes and SPN series push buttons.

ACCESSORIESOVERDOOR IN TRANSPARENT LEXAN Transparent doors made of AISI 304L (Wnr 1.4307) stainless steel with a Scotch-brite type fine satin finish. They are used for protecting with an IP66 protection level drillings or instruments. The transparent shock-resistant Lexan panel lets you see the devices mounted under overdoor. Overdoor opening is reversible and it cab be 90° or 180°, depending on the application. It is supplied in an assembly kit with template for drilling on site or preassembled on request. They can be mounted on CPN boxes or on any product with a big enough surface in order...

TRANSPARENT LEXAN PANEL VERSION WITH 1 CLOSING POINTS W AVAILABLE DRILLING SPACE ON THE BOX DOOR WITH OVERDOOR VERSION WITH 2 CLOSING POINTS AVAILABLE DRILLING SPACE ON THE BOX DOOR WITH OVERDOOR 1. models Front view ***

Hinged internal doors made in AISI 304L (Wnr 1.4307) stainless steel satin finish Scotch-Brite type. They can be fixed internally at variable distances from 40 mm to 50 mm from the external door (other fixing depth on request). The locks are at 1/4 turn with a slotted screwdriver insert. Drillings to drawing can be requested as well as drillings on the blind external door. The opening direction can be reversed (reversible door) in relation to the external door. The maximum weight to be applied to the internal door varies in function of the size, but it is not recommended to exceed 20 kg. They...