PATENT PENDING “Don´t YOU want to do this in almost no time?”... by using a bar puller that is directly fitted on the Part-off tool shank and pulls the bar into its new cutting position simultaneously with the tool’s retraction for

The PULLEX System You can’t possibly get the work done faster than by using this revolutionary Bar Puller, which forms a single unit together with the part-off tool shank: - it clamps the bar instantaneously after cut-off and spindle stop - it pulls the bar into its new position simultaneously with the tool’s retraction for automatic tool change. PULLEX’ extremely compact design allows cut-off very close to the chuck jaws. PULLEX feeds the bar within 1.5 - 2 seconds, to be compared with the job of a conventional Shortbar Feeder, which would take 10-15 seconds to execute the same operation. Then,...

Adjustment of Pulling plates This method for adjustment of the pulling plates is quick, accurate and eliminates errors originating from the turret and/or tool holders: Turn a diameter of 0.1 to 0.2 mm less than the bar diameter. Push the Pulling plates against the turned diameter to be locked in this position. The clamping force achieved by the Pulling plates entering the bar is then amplified by the somewhat sagging bar at chuck unclamp, thus securing safe operation. The Pulling Plates are pushed within their grooves (in the direction of the arrows) into the desired diameter within the Frame´s...

FRAME ORDERCODE FRAME ORDERCODE FIXING PLATES For Shank To be mounted together with the part-off tool shank. Spare Parts Remarks: The fixing plates can be used for both Left Hand and Right Hand Tools. The different sizes of frames and fixing plates can be mixed, big frame to small fixing plate and vice versa. Distributed by: MPC Automation Systems AB Box 5879, S-102 40 Stockholm, Sweden Phone:+46 8 6670950 Fax +46 8 6670952 Pullex® is a registred trademark by MPC.