Powerful coolant driven bar puller and pick-up unit ▪ Instant setup - gripping is secured without any adjustment within the whole gripping range ▪ Compact and light - Adjacent turret tool positions need not be empty ▪ Powerful - stands high pressure up to 20 bar ▪ Grippex doesn’t need high pressure for pulling properly. It can work from 0,5 bar onward ▪ Clamps very close to the chuck, allowing short overhang of the bar ▪ Clamps hexagon bars without need for spindle orientation ▪ Can also be used as a pick-up unit with robot jaws For various reasons, such a high costs or limited floor space in work shops, a small percentage of the CNC lathes are equipped with some kind of magazine-type bar feeder. In small-batch production, however, the machine spindle itself, in addition to its inserted guiding tube and Grippex, provides you with a simple and highly efficient bar feeder. Grippex is the bar puller that makes your CNC lathe more effective right away! Grippex approaches bar to be pulled Coolant ON for Grippex to clamp Grippex Small Chuck unclamp, turret moves back along Z-axis and stops exactly at programmed position Grippex Mini (2 fingers model) Chuck clamp; coolant OFF. Grippex unclamp; turret retracts Begin machi

Gripping Range * VDI 20 for Mini and VDI 30 for Large the length L and C are + 11.80 mm * VDI 40 for Large the length L and C are + 12.80 mm ■ - Grippex Large ■ - Grippex Small ■ - Grippex Mini max pressure 20 bar max pressure 15 bar max pressure 7 bar Grippex Mini Grippex Large Grippex Small Shanks ■ Straight 025, 032, 040 mm ■ VDI 30, VDI 40 Shanks ■ Straight 020, 025, 032 mm ■ VDI 20, VDI 30 Shanks ■ Straight 016, 020, 025 mm ■ VDI 16, VDI 20 Gripping fingers ■ 2-60 mm ■ 3-80 mm ■ 7-105 mm Inserts ■ Gripping Inserts (IF) Option Inserts ■ Robot Inserts (RI) ■ Robot Jaws (RJ) for 3-80 mm...