• STATIONED AT THE TURRET OR TOOL MAGAZINE • DRIVEN BY COOLANT • CONTROLLED BY THE NC-PROGRAMME Use Grippex MINI in a Lathe as a Bar Puller - self adjustable within the whole gripping range makes it possible to grip material on different diameters - it grips very close to the chuck! equipped with robot fingers and jaws - for example when unloading finished parts safely from the Sub-spindle. Use Grippex MINI in a Machining Center as a Robot - mounted on a Milling chuck with internal coolant supply, Grippex can load/unload workpieces into/out of M-code-controlled vices, chucks and rotary tables from/to a work piece storage. Grippex Mini can be stored in the tool magazine, and the adjacent tool positions need not be vacated. Advantages • Instant setup - gripping is secured without any adjustment within the whole gripping range. • The fingers and jaws are easily exchangable. • The 2-finger type is very useful when pulling/ gripping square, rectangular and irregular profiles such as cast profiles. • Easy programming: - Coolant ON for Grippex to clamp. - Coolant OFF for Grippex to unclamp. Programming example for Bar-Pulling on Lathes Chuck unclamp, GRIPPEX pulls out the bar. Chuck clamp, Coolant OFF and GRIPPEX unclamp. approaches the GRIPPEX clamps.

GRIPPEX® MINI Pulling Force Graph Dimensions at different gripping ranges GRIPPING RANGE Available shanks Gripping fingers Accessories Straight 0 16, 0 20, 025 Adapter for lathes withouth Robot jaw for internal coolant supply robot fingers ORDER CODE *) Order set contains two fingers *) Order set contains two fingers Grippex® is a Registred Trademark by MPC. The Specifikations, illustrations, and descriptions in this brochure vary in different markets and are subject to change without notice.