Catalogs >
MP Filtri >
Suction Strainer

Suction Strainer
7Pages

Catalog excerpts

STR MPA - MPM Flow rates to 875 l/min Te c h n i c a l d a t a STR (Materials) 1 - Connection: Nylon 2 - Core tube: Tinned Steel 3 - Filter media: Wire mesh 4 - End cap: Nylon 5 - Bypass valve: Nylon - Steel MPA - MPM (Materials) 1 - Connection: Aluminium 2 - Magnetic column 3 - Tie rod: Galvanized Steel 4 - End caps: Galvanized Steel 5 - Core tube: Galvanized Steel 6 - Filter media: Wire mesh 7 - Bottom: Galvanized Steel 8 - Washer: Galvanized Steel 9 - Self-locking nut: Galvanized Steel - Nylon Without bypass With bypass Without magnetic column With magnetic column • From -25°C to +110°C Bypass valve • Opening pressure 30 kPa ± 10% Elements • Fluid flow through the filter element from OUT to IN. STR - Weights (kg): See table on page 12 MPA - MPM - Weights (kg): See table on page 14 SUCTION FILTER

Open the catalog to page 1

Filter housing Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Δp varies proportionally with density. Flow rate l/min Flow rate l/min SUCTION FILTER

Open the catalog to page 2

SUCTION FILTER max 7 mm version with bypass valve only

Open the catalog to page 3

Without bypass With bypass 4 - Filter element Wire mesh 25 mm Wire mesh 60 mm Wire mesh 90 mm Wire mesh 250 mm Nominal Filtration SUCTION FILTER MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. All rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover

Open the catalog to page 4

Magnetic column SUCTION FILTER

Open the catalog to page 5

Wire mesh 25 mm Wire mesh 60 mm Wire mesh 90 mm Wire mesh 250 mm Nominal Filtration 5 - Options MP Filtri standard SUCTION FILTER MP Filtri - The filter functions as described in this bulletin are valid exclusively for original MP Filtri filter elements and replacement parts. All rights reserved The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. Copyri

Open the catalog to page 6

STH - STM - STF Te c h n i c a l d a t a STH (Materials) • Connection: Nylon - Aluminium • Core tube: Tinned Steel • Filter media: Wire mesh • End cap: Nylon - Aluminium STF - STM (Materials) • Connection: Aluminium • Core tube: Tinned Steel • Filter media: Wire mesh • End cap: Aluminium Filtration • M60: 60 mm • M90: 90 mm • M250: 250 mm Temperature • From -25°C to +110°C Elements • Fluid flow through the filter element from OUT to IN. Technical data for request ordering code SUCTION FILTER • Filter seal: NBR Customer request • Bypass valve: S (without) B (bypass on request) • Filter...

Open the catalog to page 7