AIR BREA THER FIL TERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of breather filters is to collect environmental contamination. The correct use of breather filters ensures longer life of components installed in the hydraulic circuit. The use of breather filters calls for the simultaneous installation of plugs for filling and topping up fluids; it is recommended to use plugs complete with strainer for correct prefiltration of the fluid. If the filler plug is equipped with a filter, the filtration degree must be the same as that of the breather filter. 30 Compatibility • NBR seals and Cork Gasket, compatible with: Mineral oils to ISO 2943 - aqueous emulsions Synthetic fluids, glycol water. • FPM seals, compatible with: Synthetic fluids type HS-HFDR-HFDS-HFDU.

Metal breather filter Ordering information Breather filter With filter MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved. Flow rate with Δp: 0.30 psi Filtration Dimensions 3 Threaded connection 4 TA46 G - N (Materials) 1 - Cover: Chrome plated steel 2 - Breather filter: Resin impregnated cellulose Polyurethane or Stainless steel 3 - Flange: Galvanized Steel 4 - Threaded connection: Phosphated Steel

Metal breather caps Ordering information With filter Breather filter TA80 Example: TA80 With anti-slash feature TA80G...A...P01 With filter and pressurization valve Anti-slosh feature (only with filter element 3 µm) MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved. TA80 Flow rate with Δp: 0.30 psi Filtration TA80 G (Materials) 1 - Cover: Chrome plated steel 2 - Breather filter: Resin impregnated cellulose Polyurethane 3 - Pressurization valve: Nylon Galvanized...

Nylon breather caps Series Ordering information 1 With Padlock Hasp With Dipstick With Dipstick and Padlock Hasp 2 - Breather filter: Resin impregnated cellulose or Polyurethane Flow rate with Δp: 0.30 psi MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved. Dimensions TAP 90 for connection on weld flange Ø 3.6” 2.5”

Nylon breather caps Breather caps SAP Example: SAP Resin impregnated cellulose 10 µm Resin impregnated cellulose 1 - Cover: Nylon 2 - Connection: Nylon 3 - Filter element: Resin impregnated cellulose Flow rate with Δp: 0.30 psi cfm MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved. Weights SAP 054: 0.13 lbs SAP 075: 0.33 lbs Connection to reservoir “ A ”

Nylon breather caps Ordering information Breather caps Filter element 2 - Breather filter: Resin impregnated cellulose or Inorganic microfiber With anti-splash Visual indicator Resin impreg. cellulose Clogging indicator Set pressure: - 0.9 psi ± 10 % MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved. Manual reset Dimensions Flow rate with Δp: 0.30 psi Visual Indicator Visual Indicator

Changing the filter element in breather caps series SAP 115 1 Thoroughly clean the filler cap and adjacent par ts before disassembly 3 Replace the filter element and replace the cover and a hand a tighten (DO NOT OVER TIGHTEN). 2 Unscrew and lift of f the cover. Complete unit Filter Element Visual indicator Indicator securing screw MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved.

Ordering information Breather series SA Example: SA Filter element Example: 1 - Size Filter Filter element 3 - Filter element Resin impregnated cellulose 10 µm L03 (036 excluded) Resin impregnated cellulose 10 µm 2 - Connection to reservoir Type 1 - Screw: Galvanized Steel 2 - Washer: Teflon 3 - Cover: Steel 4 - Filter element: Plastisol endcap Galvanized steel mesh or Resin impregnated cellulose 5 - Ring: Galvanized Steel MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All...

Flow rate with Δp: 0.30 psi Type SCS (Materials) Riser: Galvanized steel SCS Riser dimensions Weight

Ordering information Riser with Filter element SCS Riser only Filter element Example: 1 - Filter element type CS Inorganic microfiber Resin impregnated cellulose 6 - Seal Riser assembly excluded Inorganic microfiber Riser assembly excluded 7 - Options Weld riser Flange riser G1 with filter elements series CS G2 with filter elements series CSG MP Filtri reserves the right to make changes to the information described herein at any time it deems fit in relation to technical or commercial requirements. Copyright. All rights reserved.