Te c h n i c a l d a t a Filter housing (Materials) • Head: Anodised Aluminium • Housings compatible with: Mineral oils, synthetic fluids, aqueous emulsions, water and glycol • Housing: Anodised Aluminium • Bypass valve: Steel Pressure LMP 400 length: 2 - 3 - 4 • Working pressure: 60 bar (6 MPa) • The filter elements are compatible with: Mineral oils, synthetic fluids. Aqueous emulsions, water and glycol (series W required). • NBR seals series A, compatible with: Mineral oils, synthetic fluids, aqueous emulsions and water and glycol. • Pulsed pressure fatigue test: 1.000.000 cycles with pressure...

Option P02 “Internal tube for reduced flow rate” is recommended for flow rate values below 100/150 I/min. The use of option P02 makes it easier to fill the housing with the operating fluid. Recommended maximum flow rate Recommended maximum flow rate for filters installed on lubrication lines, return or in-line filters is defined by the maximum oil velocity in the connections. For filters mounted on Off-Line lines the maximum recommended flow rate is defined by the pressure drop of the filter element. Filter for pressurised lubrication, max. oil velocity 2.5 m/sec. Return or in-line filter, max...

Fixing holes and surface C Fixing holes and surface A - Breather plug - G 3/8” - A/F 8 B - Indicator port - Plug T2 - A/F 30 C - Bypass valve - A/F 17 D - Oil drain plug - G 3/8” - A/F 8 Thread IN - OUT connections Flanged IN - OUT connections LMP 400 - 401 Length Filter

P02 maintenance option from housing base P01 standard maintenance from head H1 Fixing holes and surface C Fixing holes and surface Length Filter B - Indicator connection - Plug T2 - A/F 30

Fixing holes and surface Fixing holes and surface A - Breather plug - G 3/8” - A/F 8 B - Indicator port - Plug T2 - A/F 30 D - Oil drain plug - G 3/8” - A/F 8 Thread IN - OUT connections Flanged IN - OUT connections LMP 430 - 431 Length Filter

Filter Element Filter element O-Ring Bonded seal for indicator Breather plug By-pass plug O-Ring Indicator connection plug Filter assembly

Filter assembly Filter Element Filter element O-Ring Bonded seal for indicator Breather plug for indicator By-pass plug O-Ring Indicator connection plug Housing spigot

Filter assembly Filter Element Filter element O-Ring Breather plug Indicator connection plug Housing spigot Tube assembly Spigot no by-pass 01044108 Spigot with by-pass 02001414 Length 5 - 02025041 Length 6 - 02025042

Filter assembly Filter element 6 - Filter element Filter element Inorganic microfibre Inorganic microfibre 6 μ Inorganic microfibre 10 μ Wire mesh Resin impregnated paper Nominal Filtration Nominal Filtration Without by-pass With bypass With by-pass Resin impregnated paper Wire mesh Wire mesh Absolute filtration 7 - Max filter element differential pressure N Opening pressure: on request NBR (Compatible with fluid HFA, HFB, HFC) Customer request Maintenance from base housing (only length 5 and 6) With internal tube for reduced flow rate MP Filtri standard Customer request Flanged Type DIFFERENTIAL...