Specifications:
The document outlines the specifications for the LMP 210 filter series. The maximum working pressure is 60 bar, with a test pressure of 90 bar and a burst pressure of 180 bar. The filter can handle flow rates up to 270 l/min. The temperature range for operation is from -25°C to +110°C.

Materials:
The filter housing is made of anodised aluminium, with a head made of aluminium and a bypass valve constructed from nylon and steel.

Pressure and Temperature:
The bypass valve opens at 3.5 bar ±10%, with other pressures available upon request. The filter elements can withstand a differential pressure of 20 bar.

Seals:
Standard seals are NBR (series A), with optional FPM (series V) seals available.

Weights and Volumes:
The weights of the filters range from 3.5 kg to 5.4 kg, and volumes range from 1.5 dm3 to 2.7 dm3, depending on the length of the filter.

Compatibility:
The housings and filter elements are compatible with mineral oils, synthetic fluids, aqueous emulsions, and water and glycol (series W required). NBR seals are compatible with mineral oils and synthetic fluids, while FPM seals are compatible with synthetic fluids type HS-HFDR-HFDS-HFDU.

Connections:
The document details various threaded and flanged connection types, including G1 to G9 and F1 to F6, with specifications for each.

Filtration:
The document specifies nominal and absolute filtration ratings, with options for inorganic microfibre and wire mesh elements.

Ordering Information:
The document provides a detailed guide for ordering, including options for filter length, seals, valves, and filtration types.

Additional Notes:
The document includes a disclaimer that the data provided are guidelines and that MP Filtri reserves the right to make changes as needed.