Catalog excerpts
FMM 050 FHA 051 Maximum pressure 420 bar Flow rate to 152 l/min Maximum pressure 560 bar Flow rate to 140 l/min Te c h n i c a l d a t a FMM 050 Filter housing (Materials) • Head: Cast iron (chemical heat treatment) • Housing: Steel (chemical heat treatment) • Bypass valve: Steel FMM FILTERS ARE PROVIDED FOR VERTICAL MOUNTING FHA FILTERS ARE PROVIDED FOR VERTICAL MOUNTING Weights (kg) FHA 051 Filter housing (Materials) • Head: Steel (chemical heat treatment) • Housing: Steel (chemical heat treatment) • Bypass valve: Steel • Working pressure: 420 bar (42 MPa) • Test pressure: 630 bar (63 MPa) • Burst pressure: 1260 bar (126 MPa) • Pulse pressure fatigue test: 1.000.000 cycles with pressure from 0 to 420 bar (42 MPa) Connections • FMM 050 - FHA 051: In-line Inlet/Outlet FHA 051 - Pressure • Working pressure: 560 bar (56 MPa) • Test pressure: 840 bar (84 MPa) • Burst pressure: 1680 bar (168 MPa) • Pulse pressure fatigue test: 1.000.000 cycles with pressure from 0 to 560 bar (56 MPa) Filter housings Δp pressure drop The curves are plotted utilising mineral oil with density of 0,86 kg/dm3 to ISO 3968. Δp varies proportionally with density. Bypass valve FMM - FHA Δp Elements type • Microfibre filter elements series N: 20 bar • Microfibre filter elements series S: 210 bar • Wire mesh filter elements series N: 20 bar • Fluid flow through the filter element from OUT to IN. • Opening pressure 6 bar ±10% • Other opening pressures on request. Seals • Standard NBR • Optional FPM Flow rate l/min series A series V PRESSURE FILTER
Open the catalog to page 1Bypass valve pressure drop FHA - Pressure drop in Reverse flow valves Flow rate l/min Flow rate l/min FMM - Filter housing with check valve Flow rate l/min Recommended maximum flow rate - Pressure drop of filter assembly equal to Ap 1,5 bar. - Connections of filter under test G 3/4". Serie H - Flow rate l/min
Open the catalog to page 2Option P01 Standard indicator port Option P01 Standard indicator port FHA 051 With Reverse flow Indicator port T2 Plug - A/F 30 Indicator port T2 Plug - A/F 30 Option P02 Without indicator port Option P02 Without indicator port Reverse flow A/F 30 Option P03 Indicator port 90° Option P03 Indicator port 90° PRESSURE FILTER Indicator port T2 Plug - A/F 30 Thread connections Type
Open the catalog to page 3Filter assembly Filter element Filter element seal Bowl seal Bowl seal anti-extrusion ring O-Ring indicator Drain plug FHA 051 See order table See order table G 1/4” with bonded seal G 1/4” with bonded seal Protective seal Indicator connection plug PRESSURE FILTER Item Description
Open the catalog to page 4PRESSURE FILTER The data in this publication are purely guideline. MP Filtri reserves the right to make changes to the models described herein at any time it deems fit in relation to technical or commercial requirements. The colours of the products shown on the cover are purely guideline. Copyright. All rights reserved.
Open the catalog to page 5Filter assembly Filter element 1 - Style Filter element Filter element Absolute filtration Inorganic Microfibre ßx (c) Nominal Filtration 7 - Max filter element differential pressure N Δp 20 bar (filter with reverse flow + bypass) Without bypass With bypass Without bypass + check valve* With bypass + check valve* With reverse flow* (only for FHA 051) With reverse flow + bypass* (only for FHA 051) *Reduced cross-section oilways 4 - Filter seals A 8 - Option a - Filter Standard threaded connection P01 for indicator Without threaded connection P02 for indicator Threaded connection for P03 90°...
Open the catalog to page 6All MP Filtri catalogs and technical brochures
-
MULTI-COMPONENTS
31 Pages
-
LMS/LDS Series
17 Pages
-
LMC/LDC Series
17 Pages
-
LMG Series
21 Pages
-
ACCESSORIES
28 Pages
-
BELL HOUSING
72 Pages
-
CLOGGING INDICATORS
24 Pages
-
COUPLINGS
46 Pages
-
CONTAMINATION CONTROL SOLUTIONS
140 Pages
-
Return / Suction Filters
76 Pages
-
SPIN-ON FILTERS
76 Pages
-
Stainless Steel Filters
102 Pages
-
Low & Medium Pressure Filters
168 Pages
-
High Pressure Filters
160 Pages
-
Suction Filters
72 Pages
-
Return Filters
230 Pages
-
FHD - DUPLEX
17 Pages
-
FHF 325 - MANIFOLD
14 Pages
-
FHB - MANIFOLD
16 Pages
-
FHM - MANIFOLD
21 Pages
-
FHP
19 Pages
-
FMP
14 Pages
-
Spin-On Filter
78 Pages
-
Stainless Steel
20 Pages
-
LMP 124
6 Pages
-
MRSX
12 Pages
-
MSH
4 Pages
-
CS - CG - CW - CT
2 Pages
-
MPS
8 Pages
-
LMP 952 - 954
6 Pages
-
LMP 900 - 901
4 Pages
-
LMD 400 - 401 - 431 DUPLEX
8 Pages
-
LMP MULTIPORT
8 Pages
-
FMP 039
4 Pages
-
Clogging Indicators
26 Pages
-
SF2 250 - 350
4 Pages
-
Suction Strainer
7 Pages
-
FRI
10 Pages
-
MPI
8 Pages
-
MPH
18 Pages
-
MPT
15 Pages
-
filter element CH
1 Pages
-
MST
4 Pages
-
STR
4 Pages
-
RF2
4 Pages
-
MPF
20 Pages
-
LMP 400 - 430
10 Pages
-
LMP 210
5 Pages
-
LMP 110-120-123 MULTIPORT
25 Pages
-
FAS
4 Pages
-
SF2 500
12 Pages
-
SF2 250
8 Pages
-
Structural components
78 Pages
-
SA - SAP
10 Pages
-
STR
4 Pages
-
Condition monitoring products
14 Pages
-
Pressure filters
116 Pages
-
In-line filters
108 Pages
-
Structural components
64 Pages
-
Accessories
68 Pages
-
Catalogue
19 Pages