The EZstrip series of grinders offer a competitive solution to solids grinding and sludge conditioning. With the ability to maintain your grinder in place, maintenance is reduced by more than 70% for significant cost savings. Typical Applications > Tanker reception > Pump protection > Fat/sludge conditioning > Abrasive sludge maceration > Screenings in waste water > Organic waste maceration Capacity > up to 2,200 gal/min Pressure > up to 5 psi Features & Benefits Maintain-in-Place Eases removal of rotating parts without disconnecting the electrical connection to the unit and the housing from the pipework. This reduces maintenance time from days to a few hours. Built-In Trash Trap Situated below and away from the cutter stack to catch any rejected materials. Rejected items can be removed or flushed out through the clean out port. Cantilever Design Eliminates the need for lower mechanical seals or bearings reducing breakdowns and repair costs. Energy Efficient Motors Efficient motors along with low installation power to further reduce operating costs. Angled Cutter Stack “Upflow” design rejects hard materials reducing the risk of damage to the cutter teeth. Service Exchange Pre-assembled cartridge is available with a 2-year warranty to allow faster reassembly time. Cartridge Assembly Short lead times for cutter stack cartridge replacement units. Equal Thrust Offset (ETOS) Cutters Capture and reduce large solids for effective maceration. Low running speeds Reduced wear for a longer working life which extends the periods between routine maintenance. Think of the savings that could be realized on abrasive applicati

All dimensions are in inches and for guidance only. For full certified drawings or assistance in selecting a grinder, visit www.moyno.com/EZstrip. www.moyno.com U.S.A. +1 937.327.3553 Outside U.S.A. 877.4UMOYNO © 2014 by Moyno | Moyno is a brand of NOV