> Each channel supports 2 D1 30 fps streams simultaneously, or merge 1 quad stream 30 fps image into 4 channels > Video latency under 200 ms > 2 Ethernet ports for Cascading or Ethernet port redundancy > Moxa DynaStream™ function support for network efficiency > ONVIF support for standardization and interoperability > Local storage capability with microSD card slot > Industrial design with -40 to 75°C operating temperature VLJus LISTED Audio Audio Inputs: 1, Line-in 3.5 mm phone jack connector Audio Outputs: 1, Line-out 3.5 mm phone jack connector Audio Format: Mono, PCM (G.711) Network Protocols: IPv4/v6, TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS, NTCIP Ethernet: 2 10/100/1000BaseT(X) Ethernet ports, RJ45 connectors Serial Port PTZ Ports: 1 RS-232 or RS-422/485 port, terminal block connector or DB9 male connector, 115.2 kbps Console Port: 1, RS-232 RJ45 port GPIO Digital Inputs: 4, max. 8 mA High: +13 V to +30 V; Low: -30 V to +3 V Relay Outputs: 2, max. 24 VDC @ 1 A LED Indicators STAT: System status PWR1: Power 1 PWR2: Power 2 FAULT: Can be configured to correspond to system alarm, power failure, or disconnected network PTZ: Indicates if PTZ or COM port data is being transmitted SD: Indicates if microSD card mounting or unmounting is successful V1, V2, V3, V4: Video input signal activity for channels 1 to 4 Video Viewing: • DynaStream™ support for changing the video frame rate automatically • On-screen display: Text lines, Graphical image (BMP, GIF, or JPEG) • CBR Pro™: Support for accurate streaming bit rate control Maximum of 5 simultaneous unicast connections, and 50 multicast clients • Image tuning to control brightness, contrast, saturation, hue, sharpness, and noise reduction

Power Requirements Input Voltage: 2 redundant power inputs, 12 to 32 VDC or 18 to 30 VAC, terminal block connector Input Current: 12 to 32 VDC, 1.0 A (max.) or 18 to 30 VAC, 1.0 A (max.) Power Consumption: 12 W (max.) Physical Characteristics Housing: Metal, IP30 protection Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) Weight: 1.13 kg (2.49 lb) Installation: DIN-rail mounting (standard), wall mounting (optional) Alarms Video Motion Detection: Each channel has 3 independently configurable motion areas Intelligent Video Surveillance: Camera tampering detection Scheduling: Daily repeat...

Package Checklist- VPort 464 video encoder 2 5-pin terminal blocks for 2 power inputs and 2 relay outputs 1 8-pin terminal block for 4 DIs 1 5-pin terminal block for the RS-232/422/485 PTZ control port Quick installation guide Documentation Warranty card Available Models VPort 464: 4-channel industrial video encoder, 2 10/100/1000 BaseT(X) Ethernet ports, -25 to 60°C operating temperature VPort 464-T : 4-channel industrial video encoder, 2 10/100/1000 BaseT(X) Ethernet ports, -40 to 75°C operating temperature Optional Accessories (can be purchased separately) SoftNVR-IA: 64-channel IP surveillance...