PT-G7728_G7828
8Pages

► Industry-specific Ethernet Switches > IEC 61850-3 Edition 2 Class 2 compliant > Hot-swappable interface modules and power modules > Built-in MMS server based on IEC 61850-90-4 switch data modeling for Power SCADA > IEEE 1588 hardware time stamp supported > V-ON™ ensures millisecond-level multicast data and video network recovery —1■ 'E2&V C€F© Introduction The PT-G7728/G7828 modular switches provide up to 28 gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7728/G7828 switches are designed to meet evolving network requirements, including a hot-swappable module design that enables you to change or add devices without shutting down your device. The multiple Ethernet modules (RJ45, SFP, PoE) and power units (24/48 VDC, 110/220 VAC/VDC) available provide even greater flexibility as well as suitability for different operating conditions. The switches support a full gigabit platform that provides enough bandwidth to set up an Ethernet backbone. Certifications include IEC 61850 Edition 2 Class 2 to ensure high availability and wide usage. : Specifications ^ Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6*, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SNMP Inform, LLDP, Flow Control, Back Pressure Flow Control, Port Mirror, Fiber Check, Syslog, Dying Gasp *IPv6 applies only to the PT-G7728 model. Filter: IGMPv1/v2/v3, GMRP, GVRP, 802.1Q, Q-in-Q VLAN Redundancy Protocols: STP/RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation Security: RADIUS, TACACS+, SSL, SSH, Port Lock, Broadcast Storm Protection, MAC Authentication Bypass, MAC Sticky, Access Control Lists Unicast Routing: Static Routing, RIP V1/V2, OSPF (PT-G7828) Multicast Routing: DVMRP, PIM-DM (PT-G7828) Modular Rackmount Ethernet Switch System, PT-G7728/G7828 s-\ --y Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP (hardware-based) Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Routing Redundancy: VRRP (PT-G7828) Power Substation: MMS, IEC 61850 QoS Switch Properties Priority Queues: 8 Max. Number of VLANs: 512 VLAN ID Range: VID 1 to 4094 IGMP Groups: 4096 MAC Table Size: 16K Packet Buffer Size: 12 Mbits Jumbo Frame Size: 9.6 KB

► Industry-specific Ethernet Switches Interface Port Types: Supports up to 28 ports: • 4 fixed ports: 2 10/100/1000BaseT(X) ports and 2 100/1000BaseSFP ports • 6 modular slots for 4-port interface modules that support 10/100/1000BaseT(X), PoE+ 10/100/1000BaseT(X), or 100/1000BaseSFP Note: See the LM-7000H datasheet for Gigabit Ethernet module and PoE+ module information. Console Port: Micro-B USB Storage Port: USB storage port (Type A connector) Power Requirements Note: The power requirements depend on which power module is being used. Detailed information can be found in the PWR-HV/LV-P48...

► Industry-specific Ethernet Switches Step 1: Select Ethernet switch system Step 2: Select power modules Step 3: Select interface modules

► Industry-specific Ethernet Switches Note: See the SFP-1G and SFP-1FE datasheets for SFP module product information. Interface MTBF (mean time between failures) PoE Ports: 100/1000BaseT(X), IEEE 802.3af/at standards, Mode A LM-7000H-4GSFP: 2,475,903 hrs LM-7000H-4GPoE: 1,280,518 hrs Standard: Telcordia (Bellcore), GB Warranty Warranty Period: 5 years Details: See www.moxa.com/warranty : Ordering InformationCompatible Ethernet Switch Systems f- Ethernet Switch System: PT-G7728/G7828 Package Checklist • LM-7000H series interface module • Substance Disclosure table • Product Certificate...

► Industry-specific Ethernet Switches Power Requirements Input Voltage: • PWR-LV-P48: 24/48 VDC for the switch system 48 VDC for PoE systems (53 to 57 VDC is recommended for PoE+ devices) • PWR-HV-P48: 110/220 VDC/VAC 48 VDC for PoE systems (53 to 57 VDC is recommended for PoE+ devices) Operating Voltage: • PWR-LV-P48: 18 to 72 VDC for the switch system 46 to 57 VDC for PoE systems • PWR-HV-P48: 88 to 300 VDC, 90 to 264 VAC Physical Characteristics Weight: PWR-HV-P48: 0.3 kg (0.66 lb) PWR-LV-P48: 0.3 kg (0.66 lb) MTBF (mean time between failures) Time: PWR-HV-P48: 1,401,713 hrs PWR-LV-P48:...

► Industry-specific Ethernet Switches > Digital Diagnostic Monitor Function > -40 to 85°C operating temperature range (T models) > IEEE 802.3z compliant > Differential LVPECL inputs and outputs > TTL signal detect indicator > Hot pluggable LC duplex connector > Class 1 laser product, complies with EN 60825-1 Specifications Interface Ethernet Ports: 1 Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only) Optical Fiber Note: When connecting the SFP-LHX, ZX, EZX, or EZX-120, we recommened using an attenuator to prevent the transceiver from being damaged by excessive optical...

► Industry-specific Ethernet Switches Power Consumption: Max. 1 W Warranty Period: 5 years Environmental Limits Details: See www.moxa.com/warranty Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: CE, FCC, TUV (EN 60825), UL 60950-1 Marine: DNV, GL : Ordering Information Gigabit Ethernet SFP Models Standard Temperature Models (0 to 60"C) Wide Temperature Models (-40 to 85"C) WDM Gigabit...