► Industrial Ethernet Gateways > Support for both EtherNet/IP adapter and scanner > Effortless configuration via web or Windows utility > Complete packet analysis and diagnosis information for maintenance > Easy I/O data maintenance via web interface > microSD card for configuration and system log backup > -40 to 75°C wide operating temperature models available > Modbus port with 2 kV built-in isolation protection > Built-in Ethernet cascading for easy wiring QOverview^^l The MGate 5105-MB-EIP is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and EtherNet/IP network communications. To integrate existing Modbus devices onto an EtherNet/IP network, use the MGate 5105-MB-EIP as a Modbus master or slave to collect data and exchange data with EtherNet/IP devices. The latest exchange data will be stored in the gateway as well. The gateway converts stored Modbus data into EtherNet/IP packets so the EtherNet/IP scanner can control or monitor Modbus devices. The MGate 5105-MB-EIP is equipped with a microSD card slot. A configuration to several MGate 5105-MP-EIP units. The configuration microSD card can be used to back up both the system configuration file stored in the microSD card will be copied to the MGate itself when and system log, and can be used to conveniently copy the same the system is rebooted. The MGate 5105-MB-EIP also provides a web console to make configuration easy without having to install an extra utility. Simply log in as an administrator to access all settings, or as a general user with read-only permission. Besides configuring basic protocol settings, you can use the web console to monitor I/O data values and transfers. In particular, I/O Data Mapping shows data addresses for both protocols in the gateway’s memory and I/O Data View allows you to track data values for online nodes. Moreover, diagnostics and communication analysis for each protocol can also provide helpful information for troubleshooting. The MGate 5105-MB-EIP has dual power inputs for greater reliability. The power inputs allow simultaneous connections to two live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to-EtherNet/IP gateways ideal for demanding industrial applications. • Max. Total I/O Data Size: Input: 496 bytes Output: 496 bytes Modbus TCP: • Mode: Client/Server • Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23 • Max. Number of Commands: 100 • Max. Number of Connections: MGate as Modbus TCP Master: 32 connections MGate as Modbus TCP Slave: 16 connections • Max. Total I/O Data Size: Input: 2048 bytes Output: 2048 bytes Ethernet Interface Protocols: EtherNet/IP, Modbus/TCP Number of Ports: 2 (1 IP, Ethernet cascade) Speed: 10/100 Mbps, Auto MDI/MDIX Connector: 8-pin RJ45 Magnetic Isolation Protection: 1.5 kV (built-in) EtherNet/IP: • Class: Adapter, Scanner • CIP Objects Supported: Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port • Max. Number of Connections: > MGate as Adapter: 16 connections for read-only, 1 connection for read/write > MGate as Scanner: 100 connections

Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Vibration: IEC 60068-2-6, IEC 60068-2-64 Shock: IEC 60068-2-27 Drop: IEC 60068-2-32 Power Requirements Input Voltage: 12 to 48 VDC Input Current: 455 mA @ 12 VDC; 125 mA @ 48 VDC Power Connector: Terminal block Standards and Certifications Safety: UL 508, EN 60950-1 Hazardous Location: Class 1 Division 2, ATEX, IECEx EMC: EN 55032/24 EMI: CISPR 32, FCC Part 15B Class...