EDS-P506E-4PoE
6Pages

► Industrial Ethernet Solutions > Built-in 4 PoE+ ports support up to 60 W output per port > Wide range 12/24/48 VDC power inputs for flexible deployment > Smart PoE functions for remote PD diagnosis and failure recovery > 2 Gigabit combo ports for high-bandwidth communication > Supports MXstudio for easy, visualized industrial network management 4+2G-port Gigabit PoE+ managed Ethernet switches with 4 IEEE802.3af/at PoE+ ports QPSi mm High Power PoE C€F© Introduction The Moxa EDS-P506E-4PoE Series are Gigabit managed PoE+ Ethernet switches that come standard with 4 10/100BaseT(X), 802.3af (PoE), and 802.3at (PoE+)-compliant Ethernet ports, and 2 combo Gigabit Ethernet ports. The EDS-P506E-4PoE Ethernet switches provide up to 30 watts of power per PoE+ port in standard mode and allow a high power output of up to 4-pair 60W for industrial heavy-duty PoE devices, such as weather-proof IP surveillance cameras with wipers/ heaters, high-performance wireless access points, and rugged IP phones. The EDS-P506E-4PoE Ethernet switches are highly versatile, | Features and Benefits • Supports different PoE output settings (High power 36 W and 60 W, Force and Legacy modes) to maximize powered device compatibility • Supports Smart PoE functions (PoE diagnosis, PD failure check, PoE scheduling, PoE Event Warning) to enhance PoE operational efficiency • Command Line Interface (CLI) for quickly configuring major managed functions • Supports EtherNet/IP, PROFINET, and Modbus/TCP protocols for device management and monitoring • Supports V-ON™ to ensure millisecond-level Layer2/Layer3 network recovery • Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), RSTP/STP, and mStp for network redundancy and the SFP fiber ports can transmit data up to 120 km from the device to the control center with high EMI immunity. The Ethernet switches support a variety of management functions, including STP/RSTP, Turbo Ring, Turbo Chain, PoE power management, PoE device autochecking, PoE power scheduling, PoE diagnostic, IGMP, VLAN, QoS, RMON, bandwidth management, and port mirroring. The EDS-P506E-4PoE series is designed especially for harsh outdoor applications with 4 kV surge protection to ensure uninterrupted reliability of PoE systems. • IGMP snooping and GMRP for filtering multicast traffic • Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning • QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism • Port Trunking for optimum bandwidth utilization • RADIUS, TACACS+, MAB Authentication, SNMPv3, IEEE 802.1x, MAC ACL, HTTPS, SSH, and sticky MAC-address to enhance network security • SNMPv1/v2c/v3 for different levels of network management • Fiber Check™ provides s comprehensive fiber Digital Diagnostic Monitoring (DDM) function and event warning on SFP fiber ports • Bandwidth management to prevent unpredictable network status • Port mirroring for online debugging • Automatic warning by exception through e-mail, relay output • ABC-02-USB (Automatic Backup Configurator) for system configuration backup/restore and firmware upgrade Technology Standards: IEEE 802.3af/at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Software Features Management: IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, DDM, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2/v3, GMRP Redundancy Protocols: STP, RSTP, MSTP, Turbo Ring v1/v2, Turbo Chain, Link Aggregation, V-ON Security: RADIUS, TACACS+, MAB Authentication, HTTPS, SSL, SSH, Broadcast Storm Protection, Port Lock, MAC ACL, MAC Sticky, NTP Authentication, SMTP with TLS

Industrial Ethernet Solutions Physical Characteristics Time Management: SNTP, NTP Server/Client, IEEE 1588v2 PTP (software-based) Industrial Protocols: EtherNet/IP, Modbus/TCP, PROFINET IO MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Housing: Metal IP Rating: IP40 protection Dimensions: 49.1 x 135 x 116 mm (1.93 x 5.31 x 4.57 in) Weight: 910 g (2.00 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Switch Properties Priority Queues: 4 Max. Number of VLANs: 4096 VLAN ID Range: VID 1 to 4094 IGMP Groups: 256...

► Industrial Ethernet Solutions

► Industrial Ethernet Solutions > Digital Diagnostic Monitor Function > -40 to 85°C operating temperature range (T models) > IEEE 802.3z compliant > Differential LVPECL inputs and outputs > TTL signal detect indicator > Hot pluggable LC duplex connector > Class 1 laser product, complies with EN 60825-1 Specifications Interface Ethernet Ports: 1 Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only) Optical Fiber Note: When connecting the SFP-LHX, ZX, EZX, or EZX-120, we recommened using an attenuator to prevent the transceiver from being damaged by excessive optical power....

► Industrial Ethernet Solutions Power Consumption: Max. 1 W Warranty Period: 5 years Environmental Limits Details: See www.moxa.com/warranty Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity: 5 to 95% (non-condensing) Standards and Certifications Safety: CE, FCC, TUV (EN 60825), UL 60950-1 Marine: DNV, GL : Ordering Information Gigabit Ethernet SFP Models Standard Temperature Models (0 to 60"C) Wide Temperature Models (-40 to 85"C) WDM Gigabit Ethernet...