► Industrial Ethernet Solutions EDS-405A/408A Series5 and 8-port entry-level managed Ethernet switches > Turbo Ring and Turbo Chain (recovery time < 20 ms @ 250 switches), and RSTP/STP for network redundancy > IGMP Snooping, QoS, IEEE 802.1Q VLAN, and port-based VLAN supported > Easy network management by web browser, CLI, Telnet/serial console, Windows utility, and ABC-01 > PROFINET or EtherNet/IP enabled by default (PN or EIP models) > Supports MXstudio for easy, visualized industrial network management Technology Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1p for Class of Service IEEE 802.1Q for VLAN Tagging Software Features Management: IPv4/IPv6, SNMP v1/v2c/v3, LLDP, Port Mirror, RMON, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SMTP, RARP, Telnet, Syslog, SNMP Inform, Flow Control, Back Pressure Flow Control Filter: 802.1Q VLAN, Port-Based VLAN, GVRP, IGMP v1/v2, GMRP Redundancy Protocols: STP, RSTP, Turbo Ring v1/v2, Turbo Chain Time Management: SNTP, NTP Server/Client Industrial Protocols: EtherNet/IP, Modbus/TCP MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 Switch Properties MAC Table Size: 2 K (EDS-405A), 8 K (EDS-408A) Packet Buffer Size: 1 Mbit Interface RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Fiber Ports: 100BaseFX ports (SC/ST connector) Console Port: RS-232 (RJ45 connector) DIP Switches: Turbo Ring, Master, Coupler, Reserve Alarm Contact: 1 relay output with current carrying capacity of 1 A @ 24 VDC Optical Fiber Fiber Cable Type Typical Distance Optical Power Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Power Requirements Input Voltage: 24 VDC, redundant dual inputs Operating Voltage: 12 to 45 VDC Input Current: EDS-405A, EDS-405A-EIP, EDS-405A-PN: 0.20 A @ 24 V EDS-405A-MM/SS: 0.28 A @ 24 V EDS-408A, EDS-408A-EIP, EDS-408A-PN: 0.22 A @ 24 V EDS-408A-MM/SS: 0.31 A @ 24 V EDS-408A-3M/3S/2M1S/1M2S: 0.32 A @ 24 V Overload Current Protection: Present Connection: 1 removable 6-contact terminal block Reverse Polarity Protection: Present

► Industrial Ethernet Solutions Physical Characteristics Housing: Metal IP Rating: IP30 protection Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) Weight: EDS-405A, EDS-405A-MM, EDS-405A-SS, EDS-405A-PN, EDS-405A-EIP: 650 g (1.44 lb) EDS-408A, EDS-408A-MM, EDS-408A-SS, EDS-408A-PN, EDS-408A-EIP: 650 g (1.44 lb) EDS-408A-3M/3S/2M1S/1M2S: 890 g (1.97 lb) Installation: DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Operating Temperature: Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature: -40 to 85°C (-40...