AWK-4131A Series
3Pages

► Industrial Wireless LAN Solutions Outdoor industrial IEEE 802.11a/b/g/n wireless AP/bridge/client > 2x2 MIMO 802.11a/b/g/n AP/bridge/client > Seamless roaming with Client-Based Turbo Roaming > Wireless redundancy with AeroLink Protection > Rugged industrial design with integrated antenna and power isolation > IP68-rated weatherproof housing designed for outdoor applications and -40 to 75°C operating temperatures > Avoid wireless congestion with 5 GHz DFS channel support CERTIFIED LISTED ^ ^ The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-4131A can be powered via PoE to make deployment easier. The AWK-4131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your investments in wireless networks. Advanced 802.11n Industrial Wireless Solution • 802.11a/b/g/n compliant AP/bridge/client for flexible deployment • Software optimized for long distance (LoS, 1 km) wireless communication with external high-gain antenna (available on 5 GHz) • Supports 60 clients connected concurrently • DFS channel support allows a wider range of 5 GHz channel selection to avoid existing wireless infrastructure and interference Advanced Wireless Technology for Mission-Critical Applications • Seamless roaming with Client-based Turbo Roaming for < 150 ms roaming recovery time between APs (Client mode) • Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between AP and clients (Client mode) Industrial Ruggedness • Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference • IP68 rated metal casing for complete ingress protection for any outdoor weather • -40 to 75°C wide operating temperature provided for smooth wireless communication in harsh environments WLAN Interface Standards: IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Spread Spectrum and Modulation (typical): • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 1 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported) Operating Channels (central frequency): US: 5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)* 5.745 to 5.825 GHz (5 channels) EU: 5.500 to 5.700 GHz (11 channels)* *DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

Security: • SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES) Transmission Rates: 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported) Transmitter Power: 802.11b: Typ. 26±1.5 dBm @ 1 Mbps, Typ. 26±1.5 dBm @ 2 Mbps Typ. 26±1.5 dBm @ 5.5 Mbps, Typ. 25±1.5 dBm @ 11 Mbps 802.11g: Typ. 23±1.5 dBm @ 6 to 24 Mbps, Typ. 21±1.5 dBm @ 36 Mbps Typ. 19±1.5 dBm @ 48 Mbps, Typ. 18±1.5 dBm @ 54...

► Industrial Wireless LAN Solutions Side View Front, Top, and Rear Views Side View Bottom View : Ordering Information rPackage Checklist- • AWK-4131A wireless AP/bridge/client • 2 2.4/5 GHz antennas: ANT-WDB-ANM-0502 • Wall-mounting kit (includes 2 supports) • Field-installable power plug • Field-installable RJ45 plug • Metal cap to cover RJ45 connector • Metal cap to cover M12-female connector • Transparent plastic sticks for field-installable plugs • Quick installation guide (printed) • Warranty card Available Models AWK-4131A-US-T: IEEE 802.11a/b/g/n IP68 wireless AP/bridge/client, US...