AWK-1151C Series
6Pages

AWK-1151C Series Industrial IEEE 802.11a/b/g/n/ac wireless client Features and Benefits • IEEE 802.11a/b/g/n/ac Wave 2 wireless client • Selectable dual-band Wi-Fi with data rates up to 867 Mbps • Latest WPA3 encryption for enhanced wireless network security • Universal (UN) models with configurable country or region code for more flexible deployment • Easy network setup with Network Address Translation (NAT) • Millisecond-level Client-based Turbo Roaming1 • Built-in 2.4 GHz and 5 GHz band pass filter for more reliable wireless connections • -40 to 75°C wide operating temperature range (-T models) • Integrated antenna isolation • Developed according to the IEC 62443-4-1 and compliant with the IEC 62443-4-2 industrial cybersecurity standards Introduction The AWK-1151C Series industrial wireless client is designed to meet the growing need for faster data transmission speeds through IEEE 802.11ac technology for data rates of up to 867 Mbps. The AWK-1151C is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The compact form factor with DIN-rail or optional wall mounting easily fits into industrial machines or control cabinets, offering reliable wireless connectivity. The AWK-1151C can operate on the 2.4 or 5 GHz band and is backwards-compatible with existing 802.11a/b/g/n deployments to future-proof your wireless investments. The AWK-1151C Series is compliant with the IEC 62443-4-2 and IEC 62443-4-1 Industrial Cybersecurity certifications, which cover both product security and secure development life-cycle requirements, helping our customers meet the compliance requirements of secure industrial network design. Advanced 802.11ac Industrial Wireless Solution • 802.11a/b/g/n/ac compliant client for flexible deployment • DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure Advanced Wireless Technology • Seamless roaming with client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs (Client Mode) Industrial Ruggedness • Integrated antenna isolation designed to provide protection against external electrical interference • -40 to 75°C wide operating temperature models (-T) provided for smooth wireless communication in harsh environments Specifications WLAN Interface WLAN Standards Frequency Band for US (20 MHz operating channels) 2.4 GHz: 802.11b/g/n with 256 QAM support 5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support AWK-1151C US Models Only: 2.412 to 2.462 GHz (11 channels) The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the pro

2. DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. .. Sincere Service 2 WWW.mOXa.COm

Receiver Sensitivity for 802.11g (measured at 2.437 GHz) Typ. -74 dBm @ 54 Mbps Receiver Sensitivity for 802.11n (2.4 GHz; measured Typ. -90 dBm @ MCS0 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -69 dBm @ MCS7 40 MHz WLAN Operation Mode Client Slave Sniffer Antenna Connectors Ethernet Interface Standards IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3az for Energy-Efficient Ethernet IEEE 802.1Q for VLAN Tagging IEEE 802.1Xfor authentication 10/100/1000BaseT(X) Ports (RJ45 connector) 1 DHCP Client DNS HTTP IPv4 LLDP SMTP SNMPv1/v2c/v3 Syslog TCP/IP...

Sincere Service www.moxa.com

5 years See www.moxa.com/warranty 1 x AWK-1151C Series wireless client 1 x DIN-rail kit 2 x 2.4/5 GHz antenna 1 x quick installation guide 1 x warranty card Warranty Warranty Period Details Package Contents Device Installation Kit Antenna Documentation Dimensions Ordering Information Model Name

Antennas ANT-WSB-PNF-12-02 12 dBi at 2.4 GHz, N-type (female), single-band directional antenna ANT-WSB5-PNF-16 16 dBi at 5 GHz, N-type (female), single-band directional antenna ANT-WDB-ONM-0707 07 dBi at 2.4 GHz and 07 dBi at 5 GHz, N-type (male), dual-band omnidirectional antenna ANT-WDB-PNF-1011 10 dBi at 2.4 GHz and 11 dBi at 5 GHz, N-type (female), dual-band directional antenna ANT-WDB-ONF-0709 7 dBi at 2.4 GHz or 9 dBi at 5 GHz, N-type (female), dual-band, omnidirectional antenna ANT-WDB-ANM-0306 3 dBi at 2.4 GHz or 6 dBI at 5 GHz, N-type (male), omnidirectional antenna ANT-WDB-ARM-02...