series Product Segments • Care Motion TiMOTION's economical TT1 series twin spindle actuator is specifically designed for home care and patient care facility beds. The TT1 electrical controls come standard with a range of voltages for use in multiple countries. It is also equipped with a SMPS transformer and has less than 0.1W of standby power consumption. A sophisticated housing design, with reliable mechanical stability, provides an alternative motor solution for various medical beds. General Features Main voltage Maximum load Dimension between shaft Maximum speed Stroke 100~240V AC (input); SMPS 29V DC, 2.5A (output) 6,000N in push only 581 mm 6.8mm/s 87mm for backrest; 69mm for footrest

Standard Dimension (mm) 168 715 Load and Speed CODE Rated Load PUSH PULLN N Typical Current at Rated Load (A) Typical Speed No Load Rated Load The user is responsible for determining the suitability of TiMOTION products for a specific application. Due to continuous development in order to improve our products, TiMOTION products are subject to frequent modifications and changes without prior notice. TiMOTION reserves the right to discontinue the sale of any products displayed on its website or listed in its catalogue or other written materials drawn up by TiMOTION.

Power cord *Note: if choosing this accessory, it can only work with TT1 without MCU.

Installation Guide 1  nlock the safety lock and U remove the fixed cap

Note : axle distance 581mm Stroke 1 = Back rest 87mm, leg rest 69mm Color 2 = Grey (Pantone 428C) Note : please follow TiMOTION standard installation guide Quick Release 0 = Without for Handsets Cable Length 1 = Straight, 4000mm A = Customized Note : #0 the cable uses 2pin plug; #1 the cable uses 3pin plug Transformer Type 2 = SMPS (2.5A) 4 = Toroidal (4A) Back-up Battery 0 = Without 1 = 9V*3pcs battery