Catalogs >
Movetec A/S >
TA19 series

TA19 series
4Pages

Catalog excerpts

series Product Segments • Comfort Motion • Ergo Motion TiMOTION's TA19 series is a quiet and telescopic style linear actuator suited for height-adjustable work tables. The telescopic tube design of the TA19 linear actuator allows for a longer stroke with a shorter retracted length and reduced installation dimensions. This linear actuator can also be equipped with Hall sensors for position feedback. General Features Voltage of motor Maximum load Maximum speed at no load Maximum speed at full load Minimum installation dimension Option

Open the catalog to page 1

CODE Rated Load PUSH N Self Typical Locking Current N (PUSH) at Rated Typical Speed No Load Rated Load (32V DC) (24V DC) The user is responsible for determining the suitability of TiMOTION products for a specific application. Due to continuous development in order to improve our products, TiMOTION products are subject to frequent modifications and changes without prior notice. TiMOTION reserves the right to discontinue the sale of any products displayed on its website or listed in its catalogue or other written materials drawn up by TiMOTION.

Open the catalog to page 2

Minimum Retracted Length Additional Retracted Length TA Series Safety Additional Stroke Limit Stroke Additional Invalid Length (mm) Note 1 Above stroke recommendation is based on safety stroke limit, for each additional 50mm stroke, it needs to add 10mm for the retracted length. For example 1 If TA19's stroke is 301mm, the retracted length = 301mm+invalid length+10mm.

Open the catalog to page 3

Load and Speed See appendix Stroke (mm) Retracted Length (mm) See appendix Rear Attachment 1 = Hole 10mm, slot 6mm Front Attachment 1 = Punched hole on the tube with plastic cover on, width A = Customized 32mm, hole 10mm 2 = Punched hole on the tube with plastic cover on, width 32mm, hole 8mm Direction of Rear Attachment 1 = 90° 2 = 0° Note : #2 needs an application for production Functions for Limit Switches 1 = Two switches at the retracted/extended positions to cut current 2 = Two switches at the retracted/extended positions to cut current with the third one in between to send signal...

Open the catalog to page 4

TA19 series 4Pages

Catalog excerpts

All Movetec A/S catalogs and technical brochures

TA19 series
4Pages