Catalogs >
Movetec A/S >
TA15 series

TA15 series
4Pages

Catalog excerpts

Product Segments • Care Motion TiMOTION's TA15 series linear actuator was specifically designed for bariatric bed applications. These beds require a robust, long life solution that incorporates safety, reliability and effortless operation. A significant feature of the TA15 linear actuator is the manual release function that allows for lowering of the patient in the event of an emergency or electrical power outage. General Features Voltage of motor Maximum load Maximum load Maximum speed at no load Maximum speed at full load Minimum installation dimension Color For bariatric bed application especially

Open the catalog to page 1

CODE Rated Load PUSH PULL Self Locking N (PUSH) Typical Current at Rated Load (A) Typical Speed Rated Load (24V DC) mm/s Note 1 The left diagram shows the speed and current figures under pushing condition. Terms of Use The user is responsible for determining the suitability of TiMOTION products for a specific application. Due to continuous development in order to improve our products, TiMOTION products are subject to frequent modifications and changes without prior notice. TiMOTION reserves the right to discontinue the sale of any products displayed on its website or listed in its...

Open the catalog to page 2

Additional Retracted Length TA Series Safety Additional Additional Stroke Limit Stroke Invalid Length 300 0<additional stroke<50 10 Note 1 Above stroke recommendation is based on safety stroke limit, for each additional 50mm stroke, it needs to add 5mm for the retracted length. For example 1 If TA15's stroke is 301mm, the retracted length = 301mm+invalid length+10mm.

Open the catalog to page 3

Stroke+220mm (for front attachment 1, 2, 3, 4) Stroke+210mm (for front attachment B, C) Note 1 : before selecting retracted length, please refer to the additional retracted length chart Note 2 : if choose handle quick release,please add 10cm for rerracted length Rear Attachment 1 = Casting U clevis, slot 8.2 mm, hole 10.2mm 2 = asting U clevis, slot 8.2 mm, hole 12.2mm C 3 = asting U clevis, slot 10.2 mm, hole 10.2mm C Front Attachment 1 = asting U clevis, slot 8.2 mm, hole 10.2mm C 2 = asting U clevis, slot 8.2 mm, hole 12.2mm C 3 = asting U clevis, slot 10.2 mm, hole 10.2mm C Direction of...

Open the catalog to page 4

TA15 series 4Pages

Catalog excerpts

All Movetec A/S catalogs and technical brochures

TA15 series
4Pages