Mouvex® Easy Clean System (ECS) for H-FLO Series Pumps Simplify & Improve Your Clean-In-Place Operations with ECS Specifically designed to improve Clean-In-Place (CIP) operations, the Mouvex Easy Clean System (ECS) for H-FLO Series Pumps (already available for Mouvex SLS4 and SLS8 pumps) seal-less drive eccentric disc pumps makes the process easier than ever before by eliminating the need for an external CIP bypass while still allowing full CIP flow to pass through the pump for maximum efficiency. Unlike other pumps that require an external CIP bypass, Mouvex H-FLO series pumps with the new ECS feature a design that incorporates the bypass directly inside the pump. With this design, there is no need for an additional power source because the compressed air source and solenoid valve used for ordinary CIP bypass can by used to power the ECS. With the ECS, the CIP process also does not negatively impact the pump’s efficiency since no extra clearance is needed to cope with CIP temperatures. Furthermore, the ECS balances the pressures inside and outside of the pump bellows creating a stronger resistance to water hammer. The ECS system is simple and easy to install, eliminates the need for additional piping, and can be operated without letting the pump cool down. Additionally, utilizing the ECS limits the pressure drop inside the pump. Pressure drop for each pumps size and CIP flow rate can be supplied upon request. Pump Cleaning Advantages: • Full CIP flow crosses the pump for a maximum efficiency • No external CIP bypass • Less piping • Easy cleaning • Simple installation • Strong resistance to water hammer • Limited pressure drop during CIP • Stands up to 6 bar (90 psi) at pump inlet during CIP • No need to let the pump cool down between warm and cold phases Mouvex H-FLO Series E

Mouvex® Easy Clean System (ECS) for H-FLO Series Pumps How the Easy Clean System Works All H-FLO series pumps can be equipped with ECS (Optional), the transmission includes a pressurization capacity designed to be supplied with 4 bar (58 psi) of compressed air. The air supply leads to the opening of the pump interior, allowing the full Clean-In-Place (CIP) flow rate to cross through the pump with limited pressure drop. This design eliminates the need for an external CIP bypass valve and linked piping. (The ECS is already available for Mouvex SLS4 and SLS8 pumps.) 4 bar (58 psi) When transmission...