SPEC SHEET 206-001 E SECTION : 200 Effective : September 2010 Replaces : September 2006 HYDRIVE Series Hydraulic Cooler, the Mouvex solution The Hydrive is used on Hydraulic drive for pumps and compressors, it integrates 3 functions : • Oil tank • Oil cooler • Security relief valve UNIQUE DESIGN • Compact size allows for easy installation on tractors and trucks with minimal space on chassis rails. The compact design with a low noise level centrifugal fan provides maximum performance and heat dissipation up to 13.5HP (10kW) on 2010 models and 26 HP (20kW) on 2020 models. BUILT FOR PERFORMANCE • Constructed from stainless steel materials to withstand the harsh environmental and operation conditions. The light weight cooler with a small hydraulic oil reservoir, reduces the concern and hazard of costly spills. • Fitting under the frame MAINTENANCE FRIENDLY • The easy to read restriction gauge mounted on the front of the Hydrive indicates when the spin-on oil filter should be replaced. Normal hydraulic oil maintenance is made easy with the reservoir drain on the Hydrive tank. OPTIONS AND ACCESSORIES • Optional Control Valve on 2010 Models • Complete Hydraulic System Packages • Hydraulic motor Adapters for Mouvex-Blackmer Pumps • Fitting on the frame Up to 190 l/mn and 270 bar www.mouvex.com

Hydrive 2010 Operations Parameters Oil Flow Rate 15 - 26 US 55 - 120 l/min Relief valve pressure, 2 possibilities set to 2465 PSI set to 170 BAR set to 5639 PSI set to 270 BAR Fan Speed 2800 RPM Return Pressure 15 - 75 PSI 1 - 5 BAR Heat Dissipation 13,5 HP for 70° F Temp. Rise 10 kW for 40° C Temp. Rise Fan Motor Flow 1.5 US GPM 5,5 l/min Weight (dry) 53 Ibs 24 kg Oil Tank Capacity 2.5 US Gallons 10 Liters High pressure line Return line 1. 2. 3. 4. 5. 6. 7. 8. Adjustable relief valve Fan speed control valve Return line filter Fan motor Filter by-pass valve Oil cooler radiator Fan System pressure...