SPECIFICATION SHEET SCREW COMPRESSOR B200 FC CHARACTERISTICS STANDARD AVAILABLE OPTIONS Oil-free Screws Mouvex® Gear case lubricating mode Dynamic sealing Bronze labyrinth Oil volume required (litre) Oil quality required Maximum flow rate at atmospheric pressure m3/h (CFM) Inlet port mm (in.) Outlet port Speed and rotation direction Power (KW) and torque (Nm) at 2.5 bar for 12R Type PF with ISO 7653-D and splined Shaft DIN 5462 / ISO 14 for direct fitting on PTO Type PS with cylindrical keyed shaft Ø 30 mm / 1.181 in for driving shaft or electric motor Type HY with flange SAEB 2 or 4 holes and hollow shaft ANSI B92-1a 7/8 SAE16/32 13 teeth Gravity torque, PF version (Nm) Z.I Plaine des Isles – 2 Rue des Caillottes F-89000 Auxerre France www.mouvex.com Non-contractual document. Mouvex may modify the products described in this document without prior notic

SPECIFICATION SHEET SCREW COMPRESSOR B200 FC OPERATING LIMITS STANDARD MATERIALS Minimum temperature °C (F) Maximum air suction temperature °C (F) Maximum vacuum allowed bar (PSI) Air inlet filtration required (microns) Speed range allowed (rpm) PART NAME Casing Bearing box Cover Screws Gears Hose Flange Seal Multiplier casing Shaft Lubrication Seals STANDARD MATERIALS Coated Cast Iron Coated Cast iron Ductile Iron Coated Cast Iron Hardened Steel PTFE Stainless Steel Graphite Cast Iron Hardened steel Synthetic oil BSC2 Fluorocarbon (FKM) AVAILABLE OPTIONS Z.I Plaine des Isles – 2 Rue des Caillottes...