Catalog excerpts
Innovative system for handling heavy loads, safely Apollo is a fully modular equipment designed to simplify industrial handling work by overcoming all common obstacles. Small ramps, gate rails, grates, cross channels or uneven floors will no longer be a problem! Thanks to its design and features, only one person is needed to move and position your heavy machinery without the need for forklift trucks. common obstacles, small ramps and inclines safely uneven floors thanks to elastic ‘PRO-GRIP’ wheels. your productivity by significantly reducing working tim
Open the catalog to page 1What is the Apollo system Apollo is a fully modular system for handling loads of up to 75 tonnes, consisting of a power unit and three skates arranged in a triangle (in the standard configuration). It is designed like a LEGO*: you choose the power unit, the self propelled steering trolley and a pair of rear rollers (fixed or steerable). The whole becomes a ‘system’ that can be implemented at any time by simply upgrading one of the 3 components to increase performance and capacity. Configurations beyond the standard allow the machine to be composed according to your needs: L with all three...
Open the catalog to page 2Because power matters 50 ton Any equipment, even with low power but very hard wheels, can move a load on a perfect, flat and smooth floor… but… If the floor is not smooth, but has obstacles of any kind - the power required to perform the same handling increases several fold. When you face a ramp or slope, the power required to overcome this obstacle increases exponentially. Hydraulic motors This is why we have developed a special traction system, which helps to overcome all the classic obstacles and slopes in total safety, both for the transported machinery and for the operator. Overcoming...
Open the catalog to page 3PowerPack Hydraulic power High power Proportional controlled movements Quick coupling Autonomy up to 8 working hours with high efficiency motor-pump system. to override obstacles and gradients up to 5% to swap self propelled unit FST when needed. with max speed set up by potentiometer by radio remote control with proportional joy-sticks to deal most demanding jobs MINI POWER 230V AC The smallest in the series, 230V AC power supply makes it usable in any industrial or non-industrial environment. Inverter-controlled motor and silenced pump connected to a proportional hydraulic distributor for...
Open the catalog to page 4FULL POWER 400V AC control unit in version 4.0 This control unit is very similar to the others, but incorporates all the functionality and devices required to comply with the requirements of the New National Transition 4.0 Plan. The Apollo system equipped with this control unit is certified “4.0 ready” and can control all Apollo series self-propelled skates up to 75 tonnes capacity. In addition, it is equipped with two additional hydraulic lines to control various options such as the RTS steerable rear trolleys or the forks of the Mouvers Transpallet. The main difference to the other models...
Open the catalog to page 5FST powered steering skates 15 cm Loading height of 150 and 160 mm - the smallest and shallow in our business Non marking heavy duty wheels with “PROGRIP” polymer. Full traction on all wheels Support plate with threaded holes to secure the load Radius of rotation around its own axis for working in confined spaces Quick couplings to configure the machine according to the job Frame with generous angle of attack and exit to tackle slopes or descents Payload on support plate, kgs Support plate height, mm
Open the catalog to page 6RT rear rollers Mouvers rear rollers are designed to work on any type of floor, even in difficult conditions. Each pair of wheels is mounted on a cantilever arm. This ensures correct and even weight distribution on all wheels, especially when negotiating small ramps, gradients and various obstacles. Mouvers rear trolleys are among the smallest and lowest in the market with a height of only 150 and 160 mm. The tilting system helps distribute the weight evenly over all wheels regardless of steps and various obstacles. Durable ‘PRO-LOAD’ elastic polymer non-marking wheels mounted on roller...
Open the catalog to page 7TwinSet FST side by side connection Classic set up with 3 support points TwinSet featuring 4 support points T move flexible loads, distribute the weight o evenly or simply to relocate support points, it is often necessary to operate a system on 4 supports. The TwinSet system allows you to connect 2 FST powered skates together and control them from just one power pack and radio control. By adding a pair of RT trolleys or RTS steering trolleys at the rear, the 4-support points system is realized. Thanks to the modularity of the Apollo system, we can therefore use 2 self-propelled FST8 and...
Open the catalog to page 8RTS rear steering rollers T give you maximum flexibility when manoeuvring o in tight spaces, we have developed hydraulically compensated rear steerable trolleys. This type of rollers allows you to move the transported machinery in any direction, regardless of the position of the support points. The RTS 15 and RTS 30 are the world’s first hydraulically steering rear rollers with hydraulic load compensation; very useful when used with the 4-point support system. The wheels of the RTS trolleys are made of PRO-LOAD polymer, same as used on the RT rear trolleys. The load support plate, with...
Open the catalog to page 9Aiming to providing its customers with the opportunity to make the most of their investment in the Apollo system, Mouvers has designed and manufactured a new attachment to be coupled to its machines. This makes it possible to acquire new business with just the integration of the Transpallet system to the Apollo machines already available. The Transpallet is a system with large extendable forks that can be positioned at various widths to suit the object to be handled. The Transpallet is powered directly from Apollo’s Power Pack and controlled by the same radio control unit. If the customer...
Open the catalog to page 10Apollo Industry The Apollo INDUSTRY system is a new pick-and-carry machine that is perfectly suited to the various handling needs in the production industry environment. This system, in line with Mouvers’ other machines, is inspired by the modularity of the individual parts, allowing our customers to create the system to their needs in a very simple way by using the most suitable accessory. The FST INDUSTRY self-propelled and steerable skate is equipped with a lifting and coupling system that can be attached to any object already fitted with wheels. Similar to a truck fifth wheel it can be...
Open the catalog to page 11All Mouvers srl catalogs and technical brochures
-
VOYAGER
2 Pages