Catalogs >
Mott >
Defender High Flow Ultra High-Efficiency Filters

Defender High Flow Ultra High-Efficiency Filters
2Pages

Catalog excerpts

Defender High Flow Ultra High-Efficiency Filters - 1

mott corporation HGasShield® Defender High Flow Ultra High Efficiency Series Filters High Flow Gas Streams Meet 9-Log Filtration ■ 316L Stainless Steel Media ■ True 9-Log Filtration Efficiency of Particles as Small as 0.003 urn; Confirmed at the Most Penetrating Particle Size of 0.08 urn ■ Operating Temperature up to 450°C (Inert Gases) ■ Operating Pressure to 2500 PSIG (172.4 Bar) at 52°C ■ 316L VAR Stainless Steel Housing Construction ■ 5Ra Surface Finish on Gas Wetted Surfaces ■ 1 x 10 9 atm cc/sec Helium Leak Rating ■ Flow Rates up to 650 slpm ■ Maximum Forward and Reverse Differential Pressure of 1000 PSID (68.9 Bar) @ 52°C ■ Manufactured, Cleaned and Packaged in a Class 100 Clean Room ■ Total Hydrocarbon Emissions Below Detectable Limits ■ Moisture Contribution <10 ppb After One Hour at Low-flow Ambient Purge B high purity products

Open the catalog to page 1

Defender High Flow Ultra High-Efficiency Filters - 2

Available Configurations Defender High Flow Ultra High Efficiency Filters Mott DEF315H Flow Rate vs. Differential Pressure Mott DEF515H Flow Rate vs. Differential Pressure Typical Flow Curves as a Function of System Pressures Typical Flow Curves as a Function of System Pressures Nitrogen Flow Rate (slpm) Nitrogen Flow Rate (slpm) Limited Warranty Mott Corporation ("Mott") warrants its GasShield® filter will meet the specified retention and media integrity standards for a period of five years from the date of purchase, providing the filter is properly installed and used in accordance with...

Open the catalog to page 2