Electronic gear Camera trigger safety - control - motion - interface Conveyor belts The FM210 can be used to synchronize roller conveyor belts. For this purpose, the frequency is recorded by a sensor on the conveyor belt. The FM210 frequency multiplier converts the input frequency into the output frequency via a freely adjustable transmission ratio, which is required for the precise synchronization of the stepper motor of the next belt. Optical inspection Another application area of the FM210 can be found in the area of optical inspection systems. Depending on the line speed, the FM210 supplies the pulse width for the camera system that corresponds to the imaging area of the camera. The trigger of the camera release can be realized by a photo cell. This allows large objects to be seamlessly combined to form a complete image using individual images. motrona GmbH Zeppelinstraße 16 DE - 78244 Gottmadingen

The new FM210 complements the portfolio of our signal converters by improved performance in the area of fast and stable frequency multiplication. The FM210 is a frequency converter which is similar to the function of a gear. Like a gear, the transmission ratio between the primary and secondary side can be freely configured. However, in a much more comfortable and flexible way. The two parameters for dividend and divisor can be freely set in the range from 0.0005 - 9.9999. In this way, division ratios can be set with an accuracy that excludes a cumulative residual error. In addition to this accuracy,...