*mydirectindustry

Catalogs
MOTORTECH GmbH
PowerView3 - HMI Module

PowerView3 - HMI Module

Product catalog summary

Overview
The PowerView3 is a compact and flexible Human-Machine Interface (HMI) module designed for the visualization and operation of MOTORTECH's control units. It features a 7-inch color display that supports over 25 screens for displaying critical operating data related to ignition and detonation control. The module allows for on-site error diagnostics without the need for a laptop and supports data recording via USB or SD card.

General Features

Visualization of ignition and detonation control via CAN bus.
Access control and CAN connection status display.
Configurable display settings including language and date.
Day and night mode for optimal visibility.

Detonation Control (DetCon2 / DetCon20)

Status indication for analog output signal, knocking intensity, and reduction state.
Fault messages for low speed, synchronizing pulse, and defective knock sensor.
Trend data display for knocking intensity and output signal.

Ignition Control (MIC4 / MIC5 series)

Status indication for pickup signals, active schedule, engine speed, and ignition timing.
Display of global ignition timing and individual cylinder ignition details.
Self-test activation and error message display.

Technical Specifications

Memory: SD card slot and USB 2.0 port.
Communication: 100 Mbit/s Ethernet and CAN fieldbus.
Touchscreen: 7-inch resistive with anti-glare surface.
Housing: High-quality steel with IP64 protection rating.
Power Supply: 24 VDC nominal, with a range of 10-30 VDC.
Environmental Conditions: Operates between -32°F to 140°F with up to 95% humidity.

Ordering Information

Part numbers for new installations and upgrades are provided, with separate activation codes required for MIC4/MIC5 and DetCon2/DetCon20 data visualization.

Contact Information

MOTORTECH GmbH, Celle, Germany.
MOTORTECH Americas, LLC, New Orleans, USA.

Legal and Trademark Information

All materials are copyrighted by MOTORTECH, and trademarks are used for reference purposes only.

Catalog excerpts

PowerView3 − HMI Module Visualization of Ignition and Detonation Control MOTORTECH ENGINE INFORMATION MONITOR Try the alternative. Call the nearest MOTORTECH sales partner for more information.

Open the catalog to page 1

MOTORTECH ENGINE INFORMATION MONITOR PowerView3 – HMI Module PowerView3 is a compact and flexible HMI module (HumanMachine-Interface) for visualization and operation of MOTORTECHs new generation control units. On more than 25 screens the 7” color display supports the full visualization of the most important operating data of ignition and detonation control as well as the adjustment of various parameters. Error diagnostics can be executed easily on-site without requiring a laptop. The touchscreen guarantees an intuitive navigation through different display pages and menus. The relevant operating...

Open the catalog to page 2

Sample Screens – Visualization MIC4 / MIC5 MIC Overview • Status displays (pickup, ignition outputs, ignition enabled, system status, schedule) • Displays the current engine speed • Shows the current global ignition timing in ° crankshaft • Displays the previous operating hours of the spark plugs Ignition • Displays the estimated ignition voltage for each individual cylinder • Display of current and past misfires of each individual cylinder Secondary Voltage • Display of estimated secondary voltage of all selected cylinders • Cylinders can be displayed and hidden individually • Zoom function...

Open the catalog to page 3

Sample Screens – Visualization DetCon2 / DetCon20 DetCon Overview • Status displays (engine knocking, active load reduction, emergency shutdown, signal errors) • Displays the analog output signal strength • Displays the knocking intensity in percent • Display of sensor errors Knocking Intensity • Display of knocking intensity for each cylinder ·Green: The detonation control does not register any excessive knocking intensity ·Yellow: Detonation control reduces knocking ·Red: Critical engine state • Additional status display for sensor errors at the cylinder Trend Knocking Intensity • Shows the...

Open the catalog to page 4

Technical Data Memory Device Dimensions • Memory SD card slot • USB 2.0 port Communication Interfaces • Width: 7.95 in. / 202.0 mm • Height: 4.97 in. / 126.2 mm • Depth: 1.16 in. / 29.5 mm • Weight: 22 oz / 670 g • Network: 100 Mbit/s Ethernet (POE) • CAN fieldbus: 1x CAN (ISO / DIS 119898) Power Supply • Power supply: Nom. 24 VDC ± 15%, max. 10 – 30 VDC • Power consumption: Typ. 4.5 W • Colors: 16 bit (65.536 colors) • Touch technology: resistive • Surface properties: 3H / anti-glare • Display size: 7.0 in. / 178.0 mm • Resolution: WVGA (800 x 480 pixels) Typical Environmental Conditions • Storage...

Open the catalog to page 5

When things get hot our Service Team is at your site quickly. Regardless of which part of the globe we need to travel to. We know that the stakes are high, and therefore we outperform the others. That is because we want everything to run smoothly at your site, everywhere and at any time. This is entirely in keeping up with our motto: Let us drop everything and work on your problem! Distribution partner for DENSO spark plugs MOTORTECH GmbH Hogrevestr. 21-23 29223 Celle Telefon: +49 5141 93 99 0 Telefax: +49 5141 93 99 99 www.motortech.de [email protected] MOTORTECH Americas, LLC 1400 Dealers...

Open the catalog to page 6

All MOTORTECH GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list