MEA Stepper Motor Tester
4Pages

Experience Leading the Future MEA Stepper Motor Testing System Pull-in torque, Pull-out torque, T-ɘ, Holding torque, Detent torque, Angular Accuracy, Step Damping, Temperature of the stepper motor, and Stepper motor performance (Torque-Speed-Efficiency), etc.

MEA STEPPER MOTOR TEST SYSTEM SYSTEM OVERVIEW The MEA SMT-1000 Stepper Motor Testing System is a turnkey system for testing stepper motors. It can test many important characteristics, including Pull-in torque, Pull-out torque, T- , Holding torque, Detent torque, Angular Accuracy, Step Damping, Temperature of the stepper motor, and Stepper motor performance (Torque-Speed-Efficiency), etc. Using universally proven technology, the M.E.A system allows precision bench-top measurements, supporting engineers in their efforts to continuously improve stepper motors. SYSTEM CONFIGURATION The stepper...

STEPPER MOTOR TESTS - THE MEASUREMENT DATA (CON’T) ● T- (Torque vs. Angle): In this test, the stepper motor’s driver is powered on but without pulse. The system will test torque and angle for the specified range, at a very slow speed of around 0.05 rpm. The system displays torque vs. angle data in the chart. ● Holding torque (Driver with power but without pulse): In this test, the stepper motor’s driver is powered on but without pulse. The system will test torque and angle over a complete rotation of 360 degrees, at a very slow speed between 1 and 10 rpm, selectable by the user. The system...

Experience Leading the Future SMT-1000 SYSTEM CORE SPECIFICATIONS SMT-1000 Torque -Angle System Characteristic Basic Measurements 1. Pull in torque System Accuracy Torque Accuracy Speed Accuracy (Internal) Angle Accuracy ±3” / ±2.5” / ±1.5”, ROD Serial Sensor for Angle Motor Diver Frequency Accuracy: < ± 0.1% FS Loading Machine 9. Each load electric parameter DS Serial Loading Machine Rated Torque Model Name Power (Rated) Internal Driver Speed ROD Serial Angle Sensor Model Name Shaft Size Start Torque Special Coupling of ROD Serial Angle Sensor Model Name Shaft Size Permissible Torque MEA...