single phase motors "MONO"
4Pages

Mono Motive motors are built according to international standard regulations; each size throughout the construction forms is calculated with reference to the tables of standard IEC 72-1. The frame is made in die casting aluminium alloy. All MONO motors are single phase 230V 50Hz. On request 60Hz and special voltages F class insulation, (H on request) S1 continuous duty service, IP55 protection (IP56, 66 and 67 on request) on request extra capacitor for high starting torque Aiming the maximum protection, the motors are equipped with important details like the pull-resistant cable gland and the combination of bearings with two shields each with rubber seal rings Cable gland can be easily moved on both the sides of the connection box, thanks to the screw cap The connection box can be rotated The special winding permits a good starting torque even without a double capacitor start/run Feet are detachable, and can be fixed on 3 sides of the housing, thus permittig the terminal box to be positioned up, right or left. Bearings selected for their silence and reliability and, for the same objectives, the rotor is dynamically balanced. 1

Performance table Type final test repo The technical files with all performance data and PDF drawings of each motor, can be downloaded from ww.motive.it “configurator” section General charac s Type 63C-2 kW 0.37 Serial Number 1203DF3437 Tested 400 V 50Hz Earth 56.26 m Winding R1 38.42 resistance Dieletric 2.86 mA strength Insulation 1000 M resistance No load dynami c test Tension 389 V Current 0.7 A Power 0.09 kW NOTE: motors can be improved in any moment. The data in www.motive.it can be more updated. Each data is even more detailed and proven by the type test reports loaded in...

you can download 2D and 3D drawings from www.motive.it 3

otive.it it - e-mail: motive@e-m web site: www.motive. al geaR BOx ROBU S in-lin e helic ronous asynch o t o r s m series d e l p h i ha se el e c t r i c th re e-p e-mail: motive@motive.it