Shaft mounted gearbox STON - 20 Pages

Add to MyDirectIndustry favorites
Shaft mounted gearbox STON

Catalog excerpts

WHffcw pmr \m tnartttftldfW 41 fttteMf DAT ML HI yigiX AND KNOW MOTIVE THANKS TO THE MOVIE ON Q

 Open the catalog to page 2

List of components STON List of components STON Code system Technical data Performance table

 Open the catalog to page 3

enduro TECHNICAL CHARACTERISTICS Uniquely contoured, rigid, precise, monobloc, cast iron Body, Base and Flange ensure extreme robustness. robust 2 or 3 reduction stages inside the same body, in order to have a wider and more reliable range of ratios versatile A modular design with detachable output flange and integral feet permits the easy and fast conversion between flange or foot mounting

 Open the catalog to page 4

flexible mounting Choice of hollow input flanges permits direct mounting of any standard motor Unique construction of Ston makes it possible to mount any size in any position. This flexibility is achieved by: + ZZ autolubricating bearings on input and output shaft 5 interchangeable plugs, including one breather plug and a level plug Please note that the vent plug also allows you to reduce the internal pressure on seals, and thus increases the efficiency of the gearbox + mechanical parts locked in their positions by snap rings.This also ensures better absorbtion of axial thrust and prolongs...

 Open the catalog to page 5

List of components STON 2 reduction stages

 Open the catalog to page 6

List of components STON 2 reduction stages STON 3 art. housing input shaft output shaft input cover adapter cover input flange 63B5 input flange 71B5 input flange 80/90B5 input flange 100/112B5 pinion first stage gear first stage pinion third stage gear third stage housing input shaft output shaft input cover adapter cover input flange 71B5 input flange 80/90B5 input flange100/112B5 pinion first stage gear first stage pinion third stage gear third stage bearing 7202ZZ bearing 7302ZZ bearing 6009ZZ bearing 6009ZZ plug seal D35X5 plug seal D42X6 oil seal 45x75x8 oil seal 40x55x8 filler plug...

 Open the catalog to page 7

List of components STON 3 reduction stages

 Open the catalog to page 8

List of components STON 3 reduction stages housing input shaft output shaft input cover adapter cover input flange 63B5 input flange 71B5 input flange 80/90B5 input flange 100/112B5 pinion first stage gear first stage pinion second stage housing input shaft output shaft input cover adapter cover input flange 71B5 input flange 80/90B5 input flange100/112B5 pinion first stage gear first stage pinion second stage gear second stage pinion third stage gear third stage bearing 6002ZZ bearing 6202ZZ bearing 6202ZZ bearing 6302ZZ bearing 6009ZZ bearing 6009ZZ plug seal D35X5 plug seal D42X6 oil...

 Open the catalog to page 9

first 4 digits describe the STON size = Ston 3 = Ston 4 st33070160805 then 1 digit tell the nr of stages 2 3 then 3 digits are the rated ratio 020 120 etc ratio i:70 output flange D.160mm input PAM flange 80 B5 =output flange 71B5 KP=160 =output flange 80/90B5 KP=200 =output flange 100/112B5 KP=250 then 3 digits for the mounting type = without output flange = with shrink disk ST3-3 5 3 digits for the input flange (that determines the input hole diameter too) 805 =80B5 905 =90B5 125 =100-112B5 135 =132B5 etc 8

 Open the catalog to page 10

Each ston is supplied with long-life synthetic oil and do not require any maintenance. The oil quantity is suitable for B3 mounting position oil type Mobil Glygoyle 30 After adapting the oil quantity, each Ston can be mounted in ANY position, thus giving big advantages in the stock management and lead time, thanks to the following 3 characteristics: ZZ autolubricating bearings on input and output shaft 5 interchangeable plugs, including one breather plug and a level plug. Level and breather plug must be positioned according to this chart mechanical parts locked in their positions by...

 Open the catalog to page 11

technical data Rated output torque Mn2 [Nm] Torque output transmissible under uniform loading and referred to the input speed n1 and the corresponding output speed n2. The output torque can be calculated with the following formula: P [kW] · 9550 Mn2 = n1 ·η n2 Torque demand Mr2 [Nm] Torque calculated based on application requirements. It must be ≤ Mn2 of the chosen BOX unit. Input power Pn1 [kW] This is the power value of the motor applied to the input shaft and corresponding to a certain input speed n1, a service factor fs=1 and a duty service S1. It is even possibile to calculate the...

 Open the catalog to page 12

Configurator Configure what you need with this consultant automatic, and get CAD files and data sheets Motive configurator allows you to shape Motive products, combine them as you want, and finally to download 2D/3D CAD drawings, and a PDF datasheet. Search by product To be used if you already know the product configuration that you want, and you just want to get quicker a PDF data sheet featuring performance data and dimensional drawings for 2D and 3D drawings. Search by performance If you’re not sure about the best products combination that you should select for your purpose, you can...

 Open the catalog to page 13

PERFORMANCE TABLE ston 3 (230 Nm)

 Open the catalog to page 14

PERFORMANCE TABLE ston 4 (450 Nm)

 Open the catalog to page 15

PERFORMANCE TABLE STON 5 (700Nm)

 Open the catalog to page 16

output shaft standard imput shaft foot mounting Ston shrink disc shaft output flange

 Open the catalog to page 18

TERMS OF SALE AND warranty 1.2 Returns to credit or replace will be accepted only in exceptional cases; however returns of goods already used to credit or replace won’t be accepted in any case. The guarantee shall be effective for all Motive products, with a term of validity of 12 months, starting from the date of shipment. The guarantee shall be subject to specific written request for Motive to take action, according to statements, as described at the paragraphs herein below. By virtue of aforesaid approval, and as regards the claim, Motive shall be bound at its discretion, and within a...

 Open the catalog to page 19

Motive s.r.l. Via Artigianale, 110/112 - 25010 MONTIRONE web site: www.motive.it - e-mail: area distributor Motive s.r.l. Via Le Ghiselle, 20 25014 Castenedolo (BS) - Italy Tel.: +39.030.2677087 - Fax: +39.030.2677125 web site: www.motive.it e-mail: motive@motive.it ston technical CATALOGUE ENG mar 15 REV.00

 Open the catalog to page 20

All MOTIVE catalogs and technical brochures

  1. NEO-COMP

    8 Pages

  2. NEO-SOLAR

    8 Pages

  3. NEO-PUMP

    8 Pages

Archived catalogs