RTF Series Rotary Indexer

MOTIONINDEX DRIVES Reliable, robust, and freely programmable The RTF rotary indexing table series stands out for its excellent flexibility. The freely programmable RTF combines flexible movement processes with a robust design, durability, and high torque levels. It differs from the RTX series thanks to a customer supplied AC servo motor which can be attached to the interface of the worm gear. In addition, the RTF has a drive curve with constant gradient. This allows it to position large loads dynamically, with a freely selectable angle. The drive angle and acceleration can be freely selected...

Load on output flange upside down 20 Torque on output flange [Nm] 322 Load on central column Precision Axial runout on the output flange 0 [mm] Combined loads and possible process forces must be confirmed by Motion Index Drives. Radial force FrM[kN] 2.7 Axial force FaM [kN] 18 Torque on output Tilting moment MkM [kNm] 0.36 fl ange [Nm] 77

* Dimensions depend on the used drive

Load on output flange Radial force FrA [kN] 23 Axial force F3a [kN] 18.4 Tilting moment MkA [kNm] 1.0 Torque on output flange [Nm] 508 Load on central column Precision Axial runout on the output flange 0 [mm] 18 Torque on output flange [Nm] 77 Radial force FrM[kN] 2.7 Axial force F3m [kN] Tilting moment MkM [kNm] 0.36 Combined loads and possible process forces must be confirmed by Motion Index Drives.

* Dimensions depend on the used drive

Load on output flange Radial force FrA [kN] 20 Axial force FaA [kN] 22.5 Torque on output flange [Nm] 833 Load on central column Precision Axial runout on the output flange 0 [mm] Combined loads and possible process forces must be confirmed by Motion Index Drives. Radial force FrMlkN] 4.1 Axial force F£3m [kN] 14 Torque on output Tilting moment MkM [kNm] 0.85 flange[Nm]170

* Dimensions depend on the used drive

Load on output flange Radial force FrA [kN] 20 Axial force F3a [kN] 25 TiltinQ mnmpnt M'kA [kNm] 2.9 Torque on output flange [Nm] 1063 Load on central column Precision Axial runout on the output flange 0 [mm] 15 Torque on output flange [Nm] 200 Radial force FrM[kN] 3.8 Axial force F£aM Tilting moment MkM [kNm] 0.95 Combined loads and possible process forces must be confirmed by Motion Index Drives.

* Dimensions depend on the used drive

Load on output flange Radial force FrA [kN] 22.5 Axial force FaA [kN] 25 Torque on output Tilting moment MkA [kNm] 3.5 flange[Nm]1572 Axial runout on the output flange 0 [mm] Radial force FrM [kN] 7 Tilting moment MkM [kNm] Torque on output flange [Nm] 450 Combined loads and possible process forces must be confirmed by Motion Index Drives. Dimensions Output flange 0

INDEX DRIVES 1204 East Maple Troy MI 48083 P: 248-743-9999 F: 248-743-0749 [email protected] www.motionindexdrives.com