MX230 Slip Ring Brochure

Product catalog summary

Overview: The MX230 Series Slip Ring/Rotary Union is designed for high performance in challenging applications, featuring fiber brush contact technology and dedicated flying leads for easy installation. It supports signal transmission (2A) and 10A current at a maximum of 600VAC/VDC.

Specifications:

Rings: 2 to 96
Current: Signal (2A), 10A
Voltage: 600 VDC/VAC
Max Speed: 1000 RPM
Through Bore Size: 38.1mm (1.5”)
Overall Diameter: 99mm (3.9”)
Housing Material: Aluminium Alloy
Torque: 0.05N.m; +0.03N.m/6 rings
Contact Material: Precious Metal: Gold-Gold
Electrical Noise: <5 mOhm
Contact Resistance: <2mOhm
Dielectric Strength: 800VDC@50Hz
Insulation Resistance: 1000MΩ@600VDC
Operating Temperature: -40°C to 80°C
Protection: IP51
Mechanical Vibration: MIL-SID-810E
Humidity: 10% to 85% RH
Materials: Lead-Free, RoHS compliant

Lead Wire Color Codes: A detailed color code is provided for easy identification of rings.

Air and Hydraulic Specifications:

Air Pressure: 150 PSI
Air Temperature: 250°F
Hydraulic Temperature: 250°F
Max Speed: 1500 RPM
Vacuum Pressure: 28 InHG
Vacuum Temperature: 250°F

Parts List and Communication Ports: The document lists various part numbers with corresponding circuits, amperage, communication ports, and connectors for Ethernet, Profibus, Device Net, and Canbus.

Important Notes: Voltage and current ratings apply to individual channels/pins. The total system ampacity is determined by the number of channels, with conversion factors provided to prevent overheating, especially in high-temperature and enclosed environments.

Catalog excerpts

MX230 series provides a long life, fiber brush contact technology for ultimate performance in many challenging applications. Dedicated flying leads with specific communication connectors for easy install. MX230 series are standard with flying leads of 72 inches. Color-coded lead wires are used on both the stator and rotor for simplified electrical connections. It can transmit signal (2A), 10A current at max 600VAC/VDC.

Open the catalog to page 1

Parts List INDEX DRIVES Ethernet Connector *Please note that all listed voltage and current ratings refern to individual channel/pins only. The overall ampacity of the system is defined by the number of channels in the system. *As a rule of thumb a 10 channel system has a conversion factor of about 0.5, meaning while each channel can handle for example 10A, the total amperage on all channel should not exceed 50A to prevent overheating. On a 20 channel system the conversion factor reduces to about 0.4, meaning the total amerage should not exceed 20 (channel) x 10A (per channel x 0.4 (conversion...

Open the catalog to page 2

MX230 Slip Ring Brochure

MX230 Slip Ring Brochure

Catalog excerpts

All Motion Index Drives, Inc. catalogs and technical brochures