LA-inline-linear-actuators
26Pages

IN-LINE LINEAR ACTUATORS linear

Motion Control Products Ltd. PART NUMBER CONFIGURATIONS - Only LA35M & LA38M have low-noise version. - LA16M / 26M / 38M / 52M can have built-in limit switch - LA16M is IP65 rating - The colour of stainless steel model is in silver

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd. force, LA26M can be a very good alternative to With IP66 protection grade, LA26M also can be Standard Dimensional Drawing

Motion Control Products Ltd. Standard Dimensional Drawing With Limit Switch

Motion Control Products Ltd. For LA26M- with limit switch version, 100N is not available. For LA26M- with limit switch version, load speed is 6mm/s @ 250N (max. load) & 4mm/s @ 500N (max. load) LA26M with Hall sensor is not available with a limit switch.

Motion Control Products Ltd. LA35M In-line electric actuator in a compact design its diameter 35mm only, makes LA35M the LA35M also has stainless steel version and Outline Dimensions- Aluminium Version

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd. LA38M The LA38M is an upgraded version of LA35M model but with internal limit switches for ends stop & over-travel position With the integrated limit switch design, the LA38M can replace the LA35M for end travel limit protection on a straight moving shaft LA38M is a slim in-line actuator with a robust design, high efficiency, Hall sensor for positioning applications, using our controllers, the LA has a synchronous function using multi actuators Stainless steel version is optional for marine applications and harsh environments Numerous applications in the marine,...

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd. LA52M LA52M is a powerful in-line linear actuator with a maximum load capacity of up to 6000N With a compact design, high load capacity, IP67M protection and synchronous functionality, the LA52M is ideal for outdoor applications where the actuators will be visible, applications include, smoke vent systems, yacht automation, agricultural machinery etc Outline Dimensions- Aluminium Version

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd.

Motion Control Products Ltd. The function of hall sensor is to provide a signal feedback to the receiver to assess the motor speed. If we know how many signals hall sensor can produce in one circle, we will know how many signals the hall sensor can provide to the receiver when the motor runs one circle and then we can control the actuator speed and stroke precisely

Motion Control Products Ltd.

Motion Control Products Ltd. Over current protection device is used to protect the motor from burning out when the actuator is in stall status for a long time. With over current protection, no damage will be occurred when the actuator travels to the end position. Over current protection can be used to disconnect the power supply when the actuator is over loaded.

Motion Control Products Ltd. A limit switch is used to test whether an object moves to the limit position. The principle is that when the object touches the limit switch, the normally open point of the switch closes and the normally closed point turns off to control circuit or receive signals.

Motion Control Products Ltd. 11-15 Francis Avenue Bournemouth Dorset, UK, BH11 8NX Tel.: +44 (0)1202 599922 enquiries@motioncontrolproducts.com www.motioncontrolproducts.com Copyright © 2021 Motion Control Products Ltd. All rights reserved. All data subject to change without notice in advance Doc. Ref.: V2021-0820