Hybrid Stepper Motors
4Pages

H ybrid St e ppe r M ot ors MOTION CONTROL PRODUCTS hybrid stepper motors are widely used in laboratory and medical equipment, printing machines, pumps, vending machines and a multitude of other applications. Breakdown of Hybrid Stepper Motor Part Number: Frame size/ Diameter (mm) Motor type: ST- standard STH- high torque Winding type Number of lead Shaft type: wire: 4, 6 or 8 S- single shaft D- double shaft o J- step angle 0.9 o Q- step angle 3.6 Customisation Options: Shaft Extensions All motors can be supplied with single or double ended shaft to customer request. Shaft length and other dimensions can also be modified on demand. Number of Leads All motors can be supplied with 4, 5, 6 or 8 leads and if required a connector can be provided on our motors to customer request. Winding Code Since each customer request can be different, we list only our standard products in this catalogue. However, we will be happy to quote other variants to your request. Holding Torque Holding torque is measured with two phases supplied at the rated current. The enclosed technical specifications are therefore typical. Our stepper motors can be supplied with or without brakes, encoders, sensors and gearboxes etc. Please contact our technical sales team for more details or application needs. (*** Each customer request for special shaft, leads, fixings etc. will be allocated a unique product code/identifier.) All data & information in this section is subject to change without notice. Hybrid Stepper Motors: Frame size 20mm - 110mm (NEMA8 to NEMA42)

M57STH series - High Torque 57mm / NEMA Size 23, 1.8 de gree ** Dimensions (in mm) - general information for reference only General Specifications Step Angle Accuracy Resistance Accuracy Inductance Accuracy Temperature Rise ±10% ±20% 80°C max. (rated current, 2 phases on) Ambient Temperature Rotation -20°C to +50°C CW (seen from front flange) ±5% (full step, no load) Insulation Resistance Dielectric Strength Shaft Radial Play Shaft Axial Play Max. Radial Force Max. Axial Force 100MΩ min., 500VDC 500VAC for one minute 0.02mm max. (450g load) 0.08mm max. (450g load) 75N (20mm from the flange)...

M57STH series - High Torque 57mm / NEMA Size 23, 0.9 de gree ** Dimensions (in mm) - general information for reference only General Specifications Step Angle Accuracy Resistance Accuracy Inductance Accuracy Temperature Rise ±10% ±20% 80°C max. (rated current, 2 phases on) Ambient Temperature Step Angle ±5% (full step, no load) Insulation Resistance Dielectric Strength Shaft Radial Play Shaft Axial Play Max. Radial Force Max. Axial Force 100MΩ min., 500VDC 500VAC for one minute 0.02mm max. (450g load) 0.08mm max. (450g load) 75N (20mm from the flange) 15N Model Specifications Model Part...

M57ST series - Standard 57mm / NEMA Size 23, 1.8 de gree ** Dimensions (in mm) - general information for reference only General Specifications Step Angle Accuracy Resistance Accuracy Inductance Accuracy Temperature Rise ±10% ±20% 80°C max. (rated current, 2 phases on) Ambient Temperature Step Angle ±5% (full step, no load) Insulation Resistance Dielectric Strength Shaft Radial Play Shaft Axial Play Max. Radial Force Max. Axial Force 100MΩ min., 500VDC 500VAC for one minute 0.02mm max. (450g load) 0.08mm max. (450g load) 75N (20mm from the flange) 15N Model Specifications Model Part Number...