VIS 100/ 200
20Pages

MORE THAN MICROSCOPY Video Inspection Scope • • • • •

VIS100/VIS200 Video Inspection Scope The all new VIS100/VIS200 series, a product by Motic for the industrial field, performs an online or offline probe application, visualization, inspection, observation, measurement, and documentation via monitor or LCD display. Available in manual and semi-automation operation, the VIS100/VIS200 series is compact in size, easy to install and has long working distance. APPLICATION EXAMPLES 4. LED-fiber optic illuminator 5. Motorized nosepiece 6. Semi-auto console > VIS200M Note: Please be aware the accessories are presented in above photos or following...

The upgradable compact sized VIS100/VIS200 series can be embedded into a probe station and customer integrated system with simple installation. For example: Max transmission distance is 25ft, VIS100/VIS200 in Customer Inspection System of Flat Panel Display via RS232 serial port connection. Working distance of 5x APO objective is 34mm, Wafer inspection and finefilm laser-cutting in Probe station. Dimension measurement, contour inspection, positioning as demands etc..

Laser rework In order to meet the diversified probe application under video condition, the infinity optical system of VIS100/VIS200 series adopts the “All-in-one” specialized lense design that supports the full popular spectrum wavelength of Probe application: 355nm (NUV), 532nm (Green), 1064nm (NIR). It can also perform laser rework under live video condition via both monitor and display simultaneously. Caution! However, Motic assumes no responsibility for the performance and safety of the laser system used with Motic microscopes. The laser emission may cause unknown harm to health, and...

The video observation on probe application covers the economic metallurgical application, material research under stereoscopic, highresolving power and extra/ultra-long working distance etc.. APO objective The extra/ultra-long working distance plan APO objectives and Purchasing part Code the plan NIR objective are both suitable for high technology or precise probe observation, inspection and/or laser rework, such and quality control of PCBA, Wafer, LCD,LED etc.. as: micron circuitry failure analysis, and sub-micron viewing LM Plan Achromat Objective LM Plan Achromat Objective - suitable for...

In case of emergency, the wide field eyepiece and monocular head can switch the VIS series back to eye observation from the monitor or LCD display. Type Monocular head Eyepiece Purchasing part Code 1101006000731 Variety of accessories with combinations of multipurpose nosepiece, illuminator, video C-mount. VIS series can be built on a budget to suit your needs. Single nosepiece Linear nosepiece Manual nosepiece Motorized nosepiece

Excellent LED-fiber optic illuminator with adjustable Aperture Diaphragm Coaxial LED illuminator for VIS100, VIS200 series is a green, compact and ideal lighting solution for diversified observation. The 3W LED fiber-optic coaxial illumination with Aperture Diaphragm can achieve anadjustable concentrated light as needed Low power consumption keeps the work-piece and workshop free from thermal and heat influence.

Only 1 Objective and 1 CCD Moticam Camera The convenience to realize online/ offline single magnification and rapid To realize online or offline rapid 2 items observation or inspection through inspection through monitor or display simultaneously via beam split lens, monitor or display at same time via in high volume production environment like: probe application on Wafer, FPD Beam split lens, such as : online or and laser reworking simultaneously for offline sort failure, outline contour and superb high efficiency. feature at same time. Beam Split Laser Port

Linear sliding nosepiece, only carry 2 Nosepiece location is precisely positioned (8μm) by built-in infrared photoelectric sensor A small-size, low-price metallurgical mi- RS232 serial port (max transmission distance 25 ft) for semi-auto control and be integrated into Customer system croscope combined with high-resolving power metallurgical objectives, stand, X-Y stage, etc. To realize only 2 selected magnification objectives or 2 different type objective need for online or offline variety engineering analysis, quality control, failure analysis via monitor or display, or weigh-less or cost...

With single objective VIS100-S With sliding nosepiece With nosepiece (centering adjustable) With motorized nosepiece economical use, Nosepiece with RMS mounting With single objective With sliding nosepiece With nosepiece (centering adjustable) With motorized nosepiece Camera mount Observation image BF/erect image Light distribution Tube lens (correction) Applicable laser C-mount adapter For observation Objectives For (optional) laser-cutting For metallurgical application 20:80 (C-mount: laser mount) 1X Applicable wavelength (near-infrared - visible- near-ultraviolet radiation) 1X Applicable...

Intermediate image position 27 Fiber mounting Position 47 Intermediate image position Fiber mounting Position 47 Intermediate image position Fiber mounting Position 47 Fiber mounting Position 47 Detail of ber mounting unit Detail of LED mounting unit Ø40 Intermediate image position

Intermediate image position Intermediate image position Intermediate image position 79.6 27 Intermediate image position C-mount Intermediate image position Intermediate image position Ø45 27 27 Detail of 1X C-mount adapter Detail of 0.5X C-mount adapter Intermediate image position Intermediate image position C-mount Intermediate image position Intermediate image position C-mount

Accessories Dimension Connecting mounter: Focusing block:

Mechanical Stage Pole stand

SYSTEM CONFIGURATION MLC-150C cold light source Monocular head Flexible light guide Gooseneck 1-arm light guide Sliding nosepiece Quadruple nosepiece (Centering adjustable) Motorized nosepiece Motorized controller NIR objective Innity corrected Plan objective