Motor Test Bench

Product catalog summary

Overview
The Motor Test Bench (MTB) is an integrated testing and measurement platform designed for embedded systems. It allows for both manual and automated testing of complete mechatronic systems, including the ability to simulate various environmental influences such as supply voltage fluctuations and communication errors. The MTB is capable of operating multiple load sections and motors simultaneously.

Key Features

Time-synchronized data recording via EtherCAT.
Supports 4 parallel load motors with power ranges from 100 W to 3 kW and torque from 0.5 Nm to 10 Nm.
Includes 2 parallel electrical segments.
Software integration with ECU-TEST for seamless ecosystem integration.
High precision power measurement using calibrated devices.

Applications

Real-time data tracing for motor control.
Support for multiple mechanical and electrical Devices Under Test (DUT).
Timing measurement and state change monitoring.

Technical Specifications

Maximum continuous output power: 3.6 kW; peak power: 4 kW.
High precision torque measurement with 24-bit encoder resolution.
Ingress Protection (IP) code of IP54 for electrical safety.
Voltage supply range: 230 VAC and 440 VDC.

Design and Construction
The MTB features a modular design that accommodates different performance classes, ensuring precise and reliable results across various applications. Its dimensions are 1245 mm in width, 2040 mm in length, and 1775 mm in height.

Important Notice
The document provides information without guaranteeing conditions or characteristics. It is intended for technically trained staff, and customers must ensure compliance with legal requirements and standards. MOTEON GmbH disclaims any warranties related to the application of the product.

Catalog excerpts

Motor Test Bench Integrated testing and measurement platform for embedded systems

Open the catalog to page 1

Motor Test Bench - MTB Manual and automated testing of motors and electronics. With our Motor Test Bench, it is possible to perform manual or automated tests on complete mechatronic systems, as well as testing various environmental influences (e.g. fluctuations in supply voltage or simulated communication errors). The MTB oﬀers enough space and capacity to operate several load sections thus several load motors. Width: Length: Height: One MTB for various use cases: Separated or integrated DUT (motor and electronics) measurement Deviating from the normal testing of motor and electronics seperatly....

Open the catalog to page 2

Technical parameters • Maximum continuous output power of 3.6 kW and maximum peak power of 4 kW High precision torque measurement with encoder resolution of 24 Bit Ingress Protection (IP) code of IP54 for electrical connections related to safety modes Wide range of voltage supplies including 230 VAC and 440 VDC Key applications • Motor control real time data tracing • Multiple mechanical and electrical DUT support • Timing measurement and state change monitoring Key features • Time-synchronized recording of various data via EtherCAT • 4 parallel load motors with diﬀerent ranges for diﬀerent DUTs...

Open the catalog to page 3

Important notice Published by MOTEON GmbH 98693, Ilmenau @ 2023 MOTEON GmbH All Rights Reserved. Do you have questions about this document? [email protected] The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaﬀenheitsgarantie”) . document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. With respect to any examples, hints or any typical values stated herein and/or any information regarding the application...

Open the catalog to page 4

Motor Test Bench

Motor Test Bench

Catalog excerpts

All MOTEON GmbH catalogs and technical brochures